|
[China]
Trade Verify
Address: Xiaoshang Village, Yingli Town, Jinzhou City, Hebei Province, China
Contact name:Anna
Jinzhou City Shitan Machinery Equipment CO. LTD. |
|
Verified Suppliers
|
|
|
Coal Mining Rock Drill Steel Rod , H22 Hex Tapered Hollow Drill Rod Color Custom
Product Introduction
Tapered drill rod is a further development of the integral drill rods. It usually has a forged collar to maintain the proper shank striking face position in the rock drill. Tapered drill rods effective lengths are measured from the collar to the bit end,which are usually from 0.6 meters to 3.6 meters.
Product Specification
| Rod dia(mm) | Rod Length(mm) | Thickness (mm) | Connect Thread | Trigger Slot | |
| inch | mm | ||||
| 3 | 76 | 1000-6000 | 5 | API2 3/8”REG | 57/64.5 |
| 3 | 76 | 1000-9000 | 8 | API2 3/8”REG | 57/64.5 |
| 3 1/2 | 89 | 1000-6000 | 6 | API2 3/8”REG | 70/64 |
| 3 1/2 | 89 | 1000-9600 | 8 | API2 3/8”REG | 70/64 |
| Rod dia(mm) | Rod Length(mm) | Thickness (mm) | Connect Thread | Trigger Slot | |
| inch | mm | ||||
| 4 | 102 | 1000-9000 | 10 | API2 3/7”REG | 76/89 |
| 4 1/2 | 114 | 1500-7620 | 6 | API3 1/2”REG | 89/95 |
| 4 1/2 | 114 | 1500-9140 | 8 | API3 1/2”REG | 89/95 |
| 4 1/2 | 114 | 1500-9140 | 10 | API3 1/2”REG | 89/95 |
| 4 1/2 | 114 | 1500-9140 | 18 | API3 1/2”REG | 89/95 |
Sanrock Drill Pipe :
1.Pipe body : cold draw seamless pipe . so the pipe have the
accurate size , good centralizer.
2.Pipe body's material is the same grade as Sandvik.
3.Thread connector :Heat and Nitrogen treatment , so the pipe is
more durable and easier to load and unload .
4.Friction welding .
Standard DTH drill pipe:
Diameter: 76mm, 89mm, 102mm, 114mm, 127mm, 140mm;
Length: 1000mm, 1500mm, 2000mm, 3000mm, 5000mm, 6000mm;
Thread: 2 3/8” API REG, 2 7/8” API REG, 3 1/2” API REG, 4 1/2” API REG,
2 3/8 API IF, 3 1/2 API IF
Four functions of lubrication for water well drilling rig
1) Reducing friction: This is the main function of oil lubrication. Due to the existence of lubricating oil film, the direct contact of the metal surface of transmission parts is prevented, so as to reduce the magic friction resistance and wear loss.
2) Cooling and heat dissipation: in high-speed rotating parts, complete heat is generated due to friction. If the heat surplus is not dispersed, the temperature will continue to rise, resulting in the burning of parts.
3) If the grease is applied on the surface of the drilling machine that is easy to rust, it can prolong the service life of the metal parts that are easy to be sprayed by the rain and prevent rust.
4) sealing blockage: wool felt is installed on the sealing packing and bearing end cover to effectively seal and prevent dust due to oil immersion.
