Active Member
|
[China]
Address: 2th floor,A building,shengde industrial zoon,dalang street road,Longhua new district,shenzhen,China
Contact name:Belinda
Shenzhen Zhongfu Optoelectronics Technology Co., Ltd. |
|
|
Features
1. Adopt original imported IC,capacitor,Mos,conform to universal standards,Stable quality and stable performance.
2. Protection:OVP/SCP/OTP/OCP
3. Current Accuracy 3%,low Dc ripple ,high inversion frequency,low
temperature,long lifespan
4. Wide input voltage 90-277V,100% load aging and full functional
testing
5. high PFC>0.95,high efficiency>0.88
6. Power outdoor high power LED lighting
7. Full aluminum case,IP67 waterproof
8. 5 years warranty
Parameters
| Model | ZF-HLB-200-36 | ZF-HLB-200W-48 | ZF-HLB-200-60 | ZF-HLB-200-72 | |
output | DC voltage | 28-36v | 36-48v | 48-60v | 60-72v |
| Rated current | 7.1-5.5A | 5.5A-4.17A | 4.17-3.3A | 3.3-2.7A | |
| Rated power | 200W | 200W | 200W | 200W | |
| Ripple&noise | 150Mvp-p | 150Mvp-p | 200Mvp-p | 100Mvp-p | |
| voltage tolerance | ±2% | ±2% | ±2% | ±2% | |
| Line regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
| Load regulation | ±1.5% | ±1.5% | ±1.5% | ±1.5% | |
| Setup,rise time | 500ms,80ms/115VAC 500ms,80ms/230VAC | ||||
| Hold up time | 16ms / 115VAC, 230VAC | ||||
Input | Input voltage | 90-277V | |||
| Frequency range | 47-63HZ | ||||
| Power factory | PF≧0.98/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC @ full load | ||||
| Total Harmonic distortion | THD< 20% (@ load≧60% / 115VAC,230VAC; @ load≧75% / 277VAC) | ||||
| Efficiency | 88% | 90% | 91% | 95% | |
| AC current | 0.64A / 115VAC 0.32A / 230VAC 0.3A / 277VAC | ||||
| Inrush current | COLD START 55A(twidth=265μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 | ||||
| Leakage current | <0.75mA / 277VAC | ||||
Protection | Over current | Constant current limiting, recovers automatically after fault condition is removed | |||
| Short circuit | Hiccup mode, recovers automatically after fault condition is removed | ||||
| Over temperature | Shut down o/p voltage, re-power on to recover | ||||
Environment | Working Temp. | Tcase= -40 ~ +80℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section) | |||
| Max.Case Temp. | Tcase= +80℃ | ||||
| Working Humidity | 20 ~ 95% RH non-condensing | ||||
| Temp.coefficient | ±0.03%/℃(0 ~ 60℃) | ||||
| Vibration | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes | ||||
Safty and standards | Safty standards | EN 61347-1:2008+A1:2011+A2:2013 ,EN 61347-2-13:2006, EN 62493:2010 | |||
| Isolaton resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH | ||||
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC | ||||
| EMC emission | Compliance to EN55015, EN61000-3-2 Class C (@ load≧60%) ; EN61000-3-3,GB17743 and GB17625.1 | ||||
| EMC immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV) | ||||
Others | MTBF | 1132K hrs min. Telcordia SR-332 (Bellcore) ; 338K hrs min. MIL-HDBK-217F (25℃) | |||
| Dimension | L208*W70*H40mm | ||||
| Packing | 0.78kg/pcs 10pcs/7.8kg | ||||
Production process
