1000 LPH Double Stage RO System Water Treatment Equipment For Hospital

1000 LPH Double Stage RO System Water Treatment Equipment For Hospital

The working principle of reverse osmosis technology is to use semi permeable membrane to separate pure water and solute containing solution. The semi permeable membrane can only pass through water. The water on the pure water side spontaneously enters the solution side through the semi permeable membrane, and the water surface on the solution side rises. This phenomenon is called osmosis. When the liquid level rises to a certain height, the pressure on both sides of the membrane reaches equilibrium, and the liquid level on one side of the solution no longer rises. At this time, there will be a pressure difference on both sides of the membrane, which is called osmotic pressure. If a pressure greater than the osmotic pressure is applied to one side of the solution, the water molecules in the solution will be squeezed to the pure water side. This process is the opposite of osmosis and is called reverse osmosis.

 
specification:

Productivity:1000L/h

Raw water pressure:0.15mpa~0.5mpa

Size:165*70*168cm

iMinimum installation area: 15 ㎡ 

installation environment:No direct sunlight and less dust

Diameter of raw wter inlet pipe:>DN50

applicable raw water:municipal tap water

Raw water:

Process:

Raw water— raw water pump —quartz sand filter — active carbon filter — soften filter — cartridge filter — sotten water tank

— one-stage high-pressure pump — RO membrane —two-stage high-pressure pump— RO membrane — pure water tank

—converter—water point.

Detail Pictures: