|
[China]
Trade Verify
Address: No. 1, Building 9, No. 1111, Changshengqiao Road, Hongguang Town, Pidu District,Chengdu City, Sichuan Province, China
Contact name:Minzy Hu
Sichuan Leader-t Water Treatment Equipment Co., Ltd |
|
Verified Suppliers
|
|
|
High Pressure Water Pump For Water Treatment Plant RO System
Accessories
Specifications:
| Item | Value |
| Horsepower | 0.05 |
| Power Source | Electric |
| Pressure | 125psi |
| Structure | Diaphragm Pump |
| Cable Length | 20cm |
| Outlet Size | 1/4inch |
| Voltage | 24v |
| Power | 36w |
| Certification | RoHS, ce, CB |
Features:
1 .50 - 800 GPD full range of supply
2. Meeting CE, RoHS and NSF certification
3. Continuous rated operation for more than 2000h 2.Adjustable
pressure stabilizing system4.Low noise, low vibration DC
motor6.Water hammer performance more than 100,000 times8.Perfect
performance when pressure above 1.2MPa
FAQ
Is the pump loud ? Will idling burn if don't connect with water ?
The pump has a certain noise during working hours, about 70
decibels. The inlet pipe is made of flexible hose, and the pump is
fixedly installed to reduce noise. No water idling for a long time
will not damage the pump.But it is not a good idea let this pump
runs dry for too long.
Is there water in the pump that has been used?
Each pump is tested at the factory, so there will be clean water in
the water, so please put a red waterproof cap in time to prevent
the pump from being too dry and not absorbing water for a long
time.
What motor is used in the pump?
Full copper wire double-rolled DC motor (power line does not divide
positive and negative) continuous service life of more than 1000
hours.
Pictures:
