Suzhou Alpine Flow Control Co., Ltd |
Verified Suppliers
|
|
Abrasion Resistance Resilient Seated Gate Valve , Soft Sealing Gate Valve
Description:
Resilient seated gate valve is a soft seated wedge with fully coated with rubber. The valve is designed by 3D software solidworks for light operating and weight. The interior and exterior FBE coating provides no corrosion. A good resilient memory & long service life by rubber wedge.
Newly advanced design, less operation torgue & abrasion resistance.
Features:
• Body & bonnet are made of high grade ductile Iron GJS500-7
• Disc is designed with an abrasion resistant nylon guide
which can help less opening or closing torgue and smooth during
operation.
1. EPDM fully vulcanized
2. WRAS approved
• Forged stem provide stronger stem operation and less moving
parts.
1. Stainless Steel 420 / Stainless Steel 431 / Stainless 304/ Stainless Steel 316 are available.
2. Platform provide better strength
• Ductile Iron inside the wedge is covered by WRAS Approved
EPDM which is suitalbe for drinking water.
• High-tech rubber curing with precise geometry dimensions,
more resilient & strong adhesive to ductile casting.
• The 4 O-ring stem seals are designed to prevent stem
leakage. and provide replacement of the O-ring without
disassambling of valve from mainline pipes.
• Epoxy powder is coated inside & outside.
• Manufacturing standard meets BS EN 1074-1, EN1074-2, BS
5163, BS EN 1171.
• F/F (Face to Face) meets the following standard: BS
EN558-1.
• Bolts are protected by silicon glue.
Quality System
IQC | Check call incoming parts |
IPQC | Check the production process is qualified |
FQC | All valves are pressure tested |
OQC | Check the valve ourlook and packing |
Size Range: DN50~DN600mm
Pressure Rating: 1.0Mpa; 1.6Mpa; (2.5MPa Up to DN300)
Working Temperature:-10℃- 80℃
Flow Media: Water, Sewage
End Connection: PN 10/ 16, PN25 is available up to DN300
Material:
Dimension :