|
[China]
Trade Verify
Address: B5 Chao Yang Factory, Caohu Industrial Park, Xiangcheng Economic Development Zone, Suzhou, Jiangsu Province P.R.C
Contact name:Matt Liang
Suzhou Alpine Flow Control Co., Ltd |
|
Verified Suppliers
|
|
|
AWWA C504 NSF61 Approved Double Flange Double Eccentric Butterfly Valve
Features:
Small platform on the valve body:
Keep the sleeve bearing fully in the hole, strong protection
No harming to the bearing during operation
Special Bearing:
Carbon Steel base coated with bronze + PTFE interior for lubricant and tin exterior to prevent rusty.
Stronger than bronze bearing and last longer
Online repairing by EPOXY:
The user only needs to repair the rubber seal from the exterior of the butterfly valve without going into the pipeline. The total repairing time could be around less than 1 hr for all kinds of the size.
Arch shape disc design :
Reduce head loss and minimize turbulence
Flow thru disc-energy saving, lower pumping cost
Rubber Seat:
Epoxy injected on the backside of groove
Dovetail design can tight the rubber seal
Multi ribs on the seal-reduce operation torque
Seal fixed in the groove and epoxy on the back side as a wedge, no worry of loosen
No need bolting and permanent positioned , decrease nut loose & hole rusting
Operation Torque:
| Bare Head Torque (Nm) | |
| Inch | Nm |
| 4 | 85 |
| 6 | 128 |
| 8 | 210 |
| 10 | 250 |
| 12 | 372 |
| 14 | 760 |
| 16 | 1160 |
| 18 | 1280 |
| 20 | 1680 |
| 24 | 2500 |
| 28 | 2592 |
| 32 | 4428 |
| 36 | 5300 |
| 40 | 7245 |
| 48 | 13320 |
Materials:
Dimension:
