Triple Pass Dryer Or Mutil-Pass Rotary Dryer Introduction
Our triple pass dryer has the advantages of compact, simple and
rational structure, high heat exchange efficiency, reliable
operation, low energy consumption, high heat efficiency, and more.
Triple Pass Dryer Or Mutil-Pass Rotary Dryer Features
1. It can do heat preservation by itself, and its heat efficiency
can be as high as 80%, while the heat efficiency of single-cylinder
dryer is only 35%. Besides, it can save as much as 68% coal and its
productivity is 100% higher.
2. Its length is 60% shorter than that of single-cylinder dryer,
which makes it easy to arrange. It only takes up about 20m2.
3. Its alloy steel plate is heat and wear resistant, and its
abrasive performance is 4 times of that of general steel plate.
Besides, it has longer service life and is easy and convenient to
maintain.
4. Its outer cylinder has a temperature lower than 60℃, while the
temperature of the outer cylinder of single-cylinder dryer can be
as high as 150℃. And the discharge temperature is lower than 60℃.
5. The temperature of its discharge hole is low, which helps to
prolong the service life of environmental protection equipment, and
it can also work together with air tank pulse bag filter.
6. Its air heating furnace can also work in conjunction with
fluidized bed furnace, coal spray furnace, and gas furnace.
Triple Pass Dryer Or Mutil-Pass Rotary Dryer Technical Details
Model | φ2.0×6m | φ2.5×6.5m | φ2.7×7m | φ3×7m | φ3.2×7m | φ3.6×8m | φ4.2×8.5m |
Diameter of outer cylinder (m) | 2.0 | 2.5 | 2.7 | 3 | 3.2 | 3.6 | 4.2 |
Length of outer cylinder (m) | 6 | 6.5 | 7 | 7 | 7 | 8 | 8.5 |
Cylinder volume (m3) | 18.84 | 31.89 | 40.5 | 49.46 | 56.26 | 81.38 | 118 |
Rotate speed of cylinder (rpm) | 3-10 | 3-10 | 3-10 | 3-10 | 3-10 | 3-10 | 3-10 |
Residence time of material (min) | 12-30 | 12-30 | 12-30 | 12-30 | 12-30 | 12-30 | 12-30 |
Initial moisture of material (%) | 6-25 | 6-25 | 6-25 | 6-25 | 6-25 | 6-25 | 6-25 |
Final moisture of material (%) | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
Max. air inlet temperature (℃) | 750-900℃ | 750-900℃ | 750-900℃ | 750-900℃ | 750-900℃ | 750-900℃ | 750-900℃ |
Productivity (T/H) | Slag | 20-25 | 25-30 | 30-35 | 35-10 | 40-45 | 50-65 | 70-85 |
Coal dust | 10-17 | 17-21 | 20-25 | 23-27 | 25-30 | 30-45 | 45-63 |
Yellow sand | 20-27 | 25-40 | 27-45 | 30-45 | 35-50 | 55-75 | 75-99 |
Motor model | Yr160m-4 | Yr132m-4E | Yr160m-4 | Yr160m-4 | Yr132m-5E | Yr160m-4E | Yr160m-4E |
Motor power (kw) | 7.5×2 | 11×2 | 7.5×4 | 7.5×4 | 11×4 | 15×4 | 18.5×4 |
Model of speed reducer | XWD-6 | XWD-6 | XWD-6 | XWD-6 | XWD-6 | XWD-8 | XWD-8 |
Speed ratio of reducer (I) | 17-29 | 17-29 | 17-29 | 17-29 | 17-29 | 17-29 | 17-29 |
Weight (T) | 25 | 32 | 35 | 38 | 43 | 57 | 77 |