ISO9001 2000kw 50mm Biomass Waste To Power Plant

Biomass Waste to Power Plant

It is combustion reaction in this Oxidation area and release heat energy, that supply energy to reduction area for reduction reaction, material pyrolysis and drying. The hot air (CO & CO2) from Oxidation area will enter into reduction area, and ash will drop into the bottom room.

Reduction layer

there is no O2 in reduction area and the CO2 from Oxidation area will have reduction with charcoal and vapor to produce CO and H2. The temperature will drop down to 600-800°C, owing to the reduction is endothermic reaction. The main output of reduction layer is CO, CO2 and H2.

Gasification always come with material drying and pyrolysis. In actual operation, there is no clear border during the described four area, that is interpenetrating and interlocking, so the main gas output is CO, CO2, H2, CH4, tar, small amount alkanes, vapor and little dust.

Applicaton

This gasifier is suitable for all kinds of biomass material such as rice husk, corncob, wood chips, straw, palm kernal shell; etc.

Size of the feedstock 30-50mm, moisture of the feedstock<15%, by these two standard, some of the raw material need to be processed before into the furnace of the gasifier, it will be crushed or dried.

Biogas to Power: 

150kw-2000kw