Batch Ball Mills are constructed of 310 stainless steel (wetted
parts), with structural steel frame and support structure. The
rugged forged steel trunnions with hubs provide support for the
shaft and give structural support for the mill ends. The mill is
machined to provide a true alignment of the mill. The heavy duty
running in oil gear reducers and chain drive will provide years of
operation with minimal maintenance. The stands are constructed of
structural steel with foot plates located on the four stand leg
bottoms. Heavy duty, self aligning bearings are used to insure
years of properly aligned mill operation. The cover on the batch
ball mills is held in place by means of easy to remove hand lugs.
For discharging, simply remove the cover, place the media retainer
screen in its place, and rotate the mill to the discharge position.
A switch is provided for bumping the mill into position, or to
dislodge material during discharge.
![](http://img.everychina.com/nimg/13/e4/823f644cc653e800f1149caba3e4.jpg)
Technical Details:
Specifications | Capacity t/h | Mill form | transmission form | Power (Kw) | Reduction type | Weight (t) |
Φ2.2X8.0 | 10-12 | Flow | Edge | 380 | ZD70 | 65 |
Φ2.2X9.5 | 14-16 | Flow | Edge | 475 | ZD70 | 70 |
Φ2.4X10.0 | 16-19 | Flow | Edge | 630 | JR75 | 94.5 |
Φ2.4X11.0 | 19-21 | Flow | Edge | 630 | RZD80 | 99.2 |
Φ2.4X13.0 | 21-23 | Flow | Edge | 800 | MBY710 | 115.2 |
Φ2.6X13.0 | 28-32 | Flow | Edge | 1000 | MBY800 | 148 |
Φ2.6X13.0 | 28-32 | Flow | centre | 1000 | MFY100 | 101.73 |
Φ3.0X12.0 | 32-35 | Flow | Edge | 1250 | MBY900 | 168.6 |
Φ3.0X13.0 | 34-37 | Flow | Edge | 1400 | MBY900 | 172.26 |
Φ3.2X13.0 | 45-50 | Flow | Edge | 1600 | MBY1000 | 196.26 |
Φ3.8X13.0 | 60-62 | Flow | centre | 2500 | MFY250 | 204 |
Φ4.2X13.0 | 85-87 | Flow | centre | 3530 | JQS3550 | 254 |