710806-1 Water Jet Cutter Parts ECL Cutting Head Precision Nozzle Body collect

710806-1 Mach 2b Mach 3b ECL cutting head precision nozzle body collect 9/32" ID water jet cutter parts

710806-1 Mach 2b Mach 3b ECL cutting head precision nozzle body collect 9/32" ID water jet cutter partsdescription:

The processing of the nozzle on the water jet and the standard of its cutting quality:

In the entire waterjet, the nozzle is not just an ordinary component, but the key to the water cutting process. It is for this reason that the nozzle must be carefully selected for the water jet, so as not to affect the cutting quality. With the deepening of the application of cutting technology, the requirements for the nozzles configured on the waterjet are gradually increasing. So how should such high-standard nozzles be processed?

First, choose an appropriate metal material for the nozzle of the water jet, and then start processing. Regarding the selection of nozzle processing methods, generally traditional mechanical processing can be formed. In the entire processing process, the difficulty is the processing of the small holes on the nozzle.

In order to accurately machine the small holes on the waterjet nozzle, you should first use a coarse shank drill bit smaller than the required diameter and shorter than the groove length to drill an initial hole in the material, and then use a general coarse shank The drill continues to drill.

In order to prevent the drill from bending, the axial force must be appropriately reduced before reaching the bottom of the hole to ensure that the processing quality and dimensional accuracy of the small hole can meet the standard. In the whole process, it is necessary to avoid the surface hardening of the workpiece material as much as possible, so that a high-quality metal nozzle can be processed for the waterjet.

With the strong guarantee of high-quality metal nozzles, it is easier to achieve the required results when waterjet cutting. Of course, this is not simple. After all, it is required to achieve the corresponding accuracy in terms of accuracy, gaps, and bevels. degree.

When using a water jet for water cutting, not only the incision is fine, but the cutting accuracy is also high, and it can also complete the cutting of various complex graphics. But this requires strong data to be verified. From the perspective of its accuracy, the accuracy of cutting the workpiece is between 0.1mm and 0.25mm, which is determined by the characteristics of the water jet and the workpiece itself.

From the perspective of the gap, the cut of waterjet cutting is about 1.0mm to 1.2mm, and it will change as the diameter of the sand knife tube is expanded. From the oblique side, the waterjet can also achieve quite good quality and meet the standard requirements.

Our company:

Shandong WAMI CNC Technology Co., Ltd.

Our company service:

1. Waterjet cutter spare parts retail and wholesale

2. Provide waterjet cutting processing services for parts suppliers and distributors, and sign confidentiality agreements

3. Provide accessories for waterjet machine manufacturer

4. Waterjet Cutting Machine

5. Provide customized machine for your drawing

6. Field maintenance and repair service

7. Online support, Field installation, commissioning and training, Video technical support

8. Free spare parts.