A: Does not affect the normal cutting of water jet cutting
machinery. The sand removing device can perform sand removing work
while the water jet machine is working. The equipment has improved
the traditional sand removal operation (the machine must be shut
down, the water and sand of the tank are cleaned out and the water
is filled again), which has gained valuable time for normal work.
B: Simple operation, complete sand removal and fast sand removal.
It takes only 5 steps to complete the sand removal work: 1. The
equipment is in position → 2. the air source is switched → 3. The
sand suction head is placed in the water tank → 4, open the air
source switch to remove sand → 5, the sand chamber is full of
shutdown and dump the waste sand. Sand removal rate of the
equipment More than 90%.
C: Large capacity. The device has a diameter of 630 (720) mm, a
height of 2.1 M, and a sand removal of up to 460 (610) L. For
example, a water tank of 2 m * 3 m can be used continuously after
removing 3-4 cans at a time.
D: Thick steel plate, perfect hydraulic system. The equipment tank
is made of 8mm thick steel plate, and an advanced water sand
separation system is integrated inside the tank. Base is 20mm thick
steel plate for durability. The switch base uses a manual hydraulic
system and is equipped with safety bolts to make the base switch
and seal become simple, safe and convenient.
E: Powerful and stable. The equipment uses an advanced pneumatic
diaphragm pump to generate a constant flow of high-pressure water
under the drive of high-pressure gas. Sand removal provides
powerful power.
F: energy saving. The entire sand removal process of the equipment
does not lose water in the water tank and does not cause waste of
water resources.
G: Mobile flexibility. The device is equipped with a ear holder for
forklift fork picking, which is convenient to move, and one sand
removing device can be used for multiple water jets.
abrasive sand removal system Production Process:
Heat treatment:
620 degrees in the furnace for 5 hours, down to 300 degrees for 3
hours, then naturally cooled in the furnace.eliminate internal
stress in the welded frame.no deformation occurs during frame
use,guarantee better cutting precision.
Shot blasting and powder coating:
Remove impurities such as surface oxide scale to improve appearance
quality.it can improve the fatigue fracture resistance of
materials, prevent fatigue failure, plastic deformation and brittle
fracture, and improve fatigue life.
Test:
Test the straightness and parallelism of linear guide rail with
precision measuring instruments.
Guaranteed higher precision when the equipment is running after the
linear guide rail is installed.
Calibration:
Calibrating equipment precision with a laser
interferometer.guaranteed more accurate cutting precision.
Shandong WAMI CNC Technology Co., Ltd is a professional
manufacturer of water jet cutting machine. We are specialized in
R&D, manufacturing, sales and technical services of ultra high
pressure water jet cutting systems and relative parts. Our water
jet cutting machine is widely used in stone industry, glass
industry, metal industry, composite materials(plastic, rubber,
acrylic, foam), food industry and so on.
