Jinan Should Shine Didactic Equipment Co., Ltd. |
|
ST 405 Heat Pump For Cooling And Heating Operation
1. Description
The purpose of a refrigeration system is the cooling of materials
and products, e.g. to protect food from spoiling. Cooling can be
described as a process in which heat is removed from the
environment.
A commonly used refrigeration system is the so-called compression
refrigeration system. In this system refrigerant flows through four
main elements: compressor, condenser, expansion element and
evaporator. The refrigeration system uses the fact that the
refrigerant has a low boiling point at low pressure. This means
that evaporation takes place on the low pressure side. During the
evaporation of the refrigerant heat is removed from the environment
and it is cooled. The condensation takes place on the high pressure
side after the evaporator. Here the heat is discharged into the
environment. If not the cooling effect but the discharged heat is
used, this is called a heat pump.
The setup of ST 101 represents a simple compression refrigeration
system. Evaporator and condenser have been designed as a pipe coil
with each end immersed in a water-filled tank. The water simulates
the environment. A thermostatic expansion valve serves as expansion
element. Two manometers indicate the two system pressures on the
high and low pressure sides. On an additional scale on the
manometer the evaporation temperature of the refrigerant is
indicated. Two thermometers measure the temperature of the water in
the tanks.
This allows for calculations of the amount of heat removed from the
environment (evaporator, cold water) and added to the environment
(condenser, hot water). A sight glass indicates the aggregate state
of the refrigerant upstream of the expansion valve.
2. Technical details
Specification
fundamentals of refrigeration in a simplified model
typical compression refrigeration system with piston compressor,
thermostatic expansion valve, evaporator and condenser (each in the
shape of a pipe coil)
2 manometers with temperature scale for the refrigerant show the
values of the refrigerant on the high and low pressure sides
2 water-filled tanks with thermometer to demonstrate the cooling
and heating effect
pressure switch to protect the compressor
sight glass to monitor the aggregate state of the refrigerant
refrigerant R513A, GWP: 631
Technical data
Compressor
power consumption: 104W at 5/40°C
refrigeration capacity: 278W at 5/40°C
displaced volume: 2,72cm3
Tank: 4x 1700mL
Refrigerant
R513A
GWP: 631
filling volume: 500g
CO2-equivalent: 0,3t
Measuring ranges
pressure: -1…12,5bar, -1…25bar
temperature: -50…40°C, -40…80°C, 2x -10…50°C
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase
120V, 60Hz, 1 phase
UL/CSA optional
Product Details and Warranty
We supply suitable spare pats according to experiment requirement,
our products take aluminum structure, A4 paper dimension aluminum
and plastic hanging box structure.
We supply 3 years warranty time.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with
pallet, and for equipment dimension less than 1CBM, we supply
plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.
Photo for Clients Visiting Factory
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
No. | Feature Name | Details |
1 | Customer design | Yes |
2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
3 | Package | Plastic film+ carton+ Fine plywood |
4 | Products standard | International didactic equipment standard |
5 | Application range | Educational equipment for university, college, vocational training centers |
6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
7 | Self owned brand | Shouldshine, SSEDU, JSS. |
8 | Production time | From 10 days to 60 days according to different items |
No. | Feature Name | Details |
1 | Customer design | Yes |
2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
3 | Package | Plastic film+ carton+ Fine plywood |
4 | Products standard | International didactic equipment standard |
5 | Application range | Educational equipment for university, college, vocational training centers |
6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
7 | Self owned brand | Shouldshine, SSEDU, JSS. |
8 | Production time | From 10 days to 60 days according to different items |