Active Member
|
[China]
Address: P.O.Box 19,Yangzhong,Jiangsu,China
Contact name:Alice
Zhenjiang Chunhuan Sealing Materials Co., Ltd. |
|
|
Green Color SS316 Material Spiral Metal Ring Gasket With Graphite filler Type D
DESCRIPTION OF PRODUCTS
Metal spiral wound gasket is widely used as a sealing gasket at
present.
It is the best elastic gasket in semi-metal sealing gasket. It is made of V-shaped or W-shaped thin steel belt and various fillers alternately wound and can withstand The use of high temperature, high pressure and conditions suitable for ultra-low temperature or vacuum conditions can solve the problem of chemical corrosion of various gaskets by changing the material combination of the gasket.
The structural density can be made according to the different locking force requirements to strengthen The main body and accurate positioning, winding gasket with metal inner ring and outer ring, using internal and external steel ring to control the maximum compression, the gasket surface contact surface of the flange sealing surface requirements are not high.
FILLED MATERIAL AND MAIN PROPERTIES
| Filler | Temperature(℃ ) | Max Pressure | Media | Compression(% ) | Rebound(% ) | Relaxation(%) |
| F.G. | -220--550 | 250 BAR | corrosive | 18--30 | ≥17 | ≤18 |
| ASB | -150--450 | 100 BAR | vulgaris air tightness | 18--30 | ≥19 | ≤28 |
| PTFE | -200-- 250 | 100 BAR | corrosive | 18--30 | ≥15 | ≤13 |
| NAF | -100--350 | 100 BAR | vulgaris air tightness | 18--30 | ≥19 | ≤28 |
| MICA | -150--800 | 100 BAR | H-TEMP | 18--30 | ≥19 | / |
| CER | -200--1090 | 100 BAR | Ultra-TEMP | 18--40 | ≥19 | / |
MATERIALS FOR OD AND ID,MAIN PROPERTIES
| Materials | Mark | Hardness(HB) | Temperature(°C) |
| Carbon steel | CS | 120 | -40~+540 |
| SUS 304 | 304 | 130~180 | -195~+550 |
| SUS 316L | 316L | 130~180 | -100~+550 |
| SUS 321 | 321 | 130~190 | -195~+760 |
| HASTELLOR-B2 | HASTB | 215 | -185~+1090 |
| INCONEL-600 | INC600 | 150 | -100~+1090 |
| MONEL-400 | MON | 150 | -130~+820 |
| Ti | T2 | 215 | -195~+1090 |
STANDARD
·HG20610 /HG20631 / ·ASME B16.20/·DIN / BS 3381-1999
·JIS B2404-1999 JIS TS-1998
·GB/T4622.2 /·JB/T4719 /SH3407 and so on
CHARECTERISTIC
1. The applicable working condition range is wide. Can resist high temperature, high pressure, and adapt to the use condition of ultra-low temperature or vacuum. By changing the material combination of the gasket, the chemical corrosion problem of the various media to the gasket can be solved.
2. The stress compensation ability is strong. The sealing performance is stable and reliable at the station with frequent temperature and pressure fluctuation.
3. The sealing performance is excellent.
4. The surface accuracy requirement for flange sealing contact with the gasket is not high. 5.The installation is convenient, and the pre-tightening pressure of the gasket is low.
APPLICATION
* Suitable for uneven load, easy relaxation of joint force, periodic change of temperature and pressure, impact or vibration.
* Is the valve, pump, heat exchanger, tower, manhole, hand hole and other flange connections of the static seal original,
* Widely used in petrochemical, machinery, power, metallurgy, shipbuilding, medicine, atomic energy and aerospace and other departments.
