Active Member
|
[China]
Address: JINGYUAN 7 ROAD, JINGHE INDUSTRIAL PARK， NORTH DISTRICT,XI'AN，CHINA 710200
Contact name:sales
XI'AN BEICHENG ELECTRONICS CO.,LTD |
|
|
VICTOR 140A 0--60A High Accuracy Clamp Leaker With RS232 Small Clamp Size AC Line And on-line current measurement lower than AC600V
Introduction
High Accuracy Clamp Leaker is specially designed for measurement of AC leakage current; by adopting up-to-date CT technology and digital integration technology, it is a product with relatively small size, high accuracy and perfect function compared with similar leakers in the world. The leaker could be widely applied in those fields as electricity, communications, meteorology, railroad, oilfield, construction, measurement, scientific & research teaching institutes, industrial and mining establishments.
Clamp core of this High Accuracy Clamp Leaker adopts special alloy; in addition, with utilization of magnetic shielding technology, it is almost free from influences of external magnetic field so as to ensure high precision, high stability and high reliability of perennial continuous measurement.
This High Accuracy Clamp Leaker obtains one RS232 interface. With the help of the software that we provide, many functions are available. For example, on-line monitoring, historical data inquiry,active curve drawing, indication of max, min and average value, alarm setting and indication. There are also functions like saving to documents and printing when connected to PC.
This High Accuracy Clamp Leaker could be used for AC Line current measurement and on-line current measurement with voltage lower than AC600V; it also have those functions as peaking holding, data holding and data storage; with convenient use, it is an essential tool for electrician safety testing.
Technical specifications
| Model | Measure Range | Resolution | Clamp Dimension |
| 140A | 0.000mA～60.00A | 1uA | 25X30mm |
| Function | Measurement of AC leakage current, AC current and on-line measurement |
| Power | Zn-Mn dry battery,6F22,9V |
| Test Mode | Clip-on CT,integral mode |
| Display Mode | Four digits LCD display |
| Dimension | Width × Height× Thickness: 175mm×70mm×38mm |
| LCD Dimension | 35mm×21.5mm；display domain:32mm×15mm |
| Sampling Rate | about 2 times/s |
| Frequency | 50/60Hz Automatically |
| Range Shift | Automatically |
Accuracy (23℃±3℃, below 70%RH) | 0.00～60.00A: ±1.5%±5dgt |
| Voltage Range | AC600V |
| RS232 Interface | Data stored in the memory of the meter via RS232 upload to PC, or on-line monitoring |
| Storage | 99units,all used when display FULL |
| Peak Hold | Push HOLD without release, the meter will show the peak value during the pushing period |
| Reading Hold | DH indicating the reading is hold |
| Out of Range | OL indicating the current is out of range |
| Auto Power-off | 5 Minutes after power on, it will power off automatically to lower the power consumption |
| Battery Voltage |  Indicating the battery voltage is lower then 7.2V.Then the battery
have to be changed |
| Weight | 120g(including the battery) |
| Consumption | About 5mW |
| Temperature and Humidity | Working: 0℃～40℃,below 80%rh Storage: -10℃～60℃,below 70%rh |
| Insulating Strength | AC2kV/rms (between the alloy of the clamp and the housing) |
| Applicable Safety Rules | IEC1010-1,IEC1010-2-032,pollution, etc 2,CAT Ⅲ(600V) |
Accessories
| Clamp tester | 1 pc |
| RS232 Com cable | 1 pc |
| Software | 1 disk |
| Battery(6F22 9V) | 1 pc |
| User Manual | 1 copy |
| Warranty card / Certification | 1 copy |
