Active Member
|
[China]
Address: NO. 339, Xima Avenue, Fengquan District, Xinxiang, Henan, China
Contact name:Magie
Xinxiang AAREAL Machine Co.,Ltd |
|
|
Semi Cover Solid Liquid Separator Slurry Vibro Sieve Machine 600mm 800mm
Introduction of High Frequency Slurry Vibro Screening Machine for Paper Pulp:
High Frequency Slurry Vibro Screening Machine for Paper Pulp is special for sieving glaze, pigment and highly viscous fluids. The very high frequency vibration movement enables the use of meshes with very fine mesh size. The trolley, which is adjustable in height, makes the machine easy to move around in production lines and in preparation and storage departments.
The high frequency vibro screen is composed of vibration exciter, pulp distributor, screen frame, frame, suspension spring and screen. High frequency vibrating screen is used for dewatering and classification after secondary grinding in iron processing plant. Due to the high screening efficiency of this type of screening machine, it can reduce the secondary grinding cycle load, increase the capacity of the primary ball mill table, and also effectively improve iron Grade, processing capacity is generally 3~5 tons per cubic meters.
Purpose of High Frequency Slurry Vibro Screening Machine for Paper Pulp:
1. Removal of Impurities: the high frequency vibrating sieve can remove a large number of liquid materials in different sizes of a small part of impurities, rapid separation.
2. Solid-liquid Separation: the high frequency vibro screen machine can deal with mixed solid and liquid materials effectively, realize solid-liquid separation quickly, and filter out materials of different orders.
More Information About High Frequency Slurry Vibro Screening Machine for Paper Pulp:
| Name | ceramic glazes vibrating sieve, ceramic slurry vibrating screen, high frequency vibrating screen, high frequency vibro sifter |
| Features | high-frequency vibration |
| Purpose | removal of impurities, solid-liquid separation etc. |
| Layers of Screen | 1~2 layers of screen |
| Motion | three dimensional motion |
| Power Source | one set of verticle vibrating motor |
| Frequency | 3000 times per minute |
| Exciting Force | 3KN~15KN |
| Diameter | 450mm, 600mm, 800mm, 1000mm, 1200mm |
| Material | stainless steel 304, 316L etc. |
| Application | ceramic glazes, ceramic slurry, paper pulp etc. |
Features of High Frequency Slurry Vibro Screening Machine for Paper Pulp:
1. All kinds of slurry in the insoluble material can be quickly
removed, the residue automatically discharged.
2. High efficient with low energy, automatic grading, smooth
movement, low noise, continuous production.
3. New grid structure, the long service life of screen, no
deformation of the mesh, changing the screen mesh only take 3-5
minutes, no angle without reaching, easy to clean and disinfect.
4. High-power and high-frequency motor, with a water-proof and
dust-proof device, long service life, more safe and secure.
5. Small size, light weight, simple operation, easy maintenance.
6. Fully sealed, the liquid not exposed, large capacity, high
screening accuracy, the smallest particle size can be screened to
500 mesh.
Working Principle of High Frequency Slurry Vibro Screening Machine for Paper Pulp:
The main working part of the high frequency vibrating screen is the rotor with a hammer (also called a hammer). the motor drives the rotor to rotate at high speed in the crushing chamber. Materials from the upper feed inlet into the machine, by the high-speed movement of the hammer hit, impact, shear, grinding and crushing. In the lower part of the rotor, a sieve plate is arranged, and the grain level less than the size of the sieve hole in the comminuted material is discharged through the sieve plate, and the coarse grain resistance larger than the size of the sieve hole remains on the sieve plate to continue to be hit and ground by the hammer, and finally the machine is discharged through the sieve plate.
| Center of Gravity Angle | Main Usage | Effects |
| 0° | rough classification | the raw material flows from the center line to the circumferential direction |
| 15° | general screening | start the vortex motion |
| 45° | precision grading | the longest vortex motion |
| >90° | special purpose | raw materials concentrate to the center |
Technical Parameters of Portable High Frequency Vibro Filter Sieve Machine for Ceramic Industry:
| Diameter (mm) | Power (kw) | Effective Diameter of Mesh (mm) | Exciting Force(kN) | Weight (kg) |
| 450 | 0.18 | 420 | 3 | 50 |
| 600 | 0.25 | 600 | 5 | 65 |
| 800 | 0.55 | 800 | 8 | 78 |
| 1000 | 0.75 | 970 | 10 | 130 |
| 1200 | 1.1 | 1170 | 15 | 170 |
Application of High Frequency Slurry Vibro Screening Machine for Paper Pulp:
High frequency vibrating sieve is suitable for dry, wet sieving, classification and dehydration of various materials in industries such as ore dressing, coal preparation, chemical industry, brick making, food, pharmaceutical, alkali making, fertilizer, paper making and other industries. It is used for fine-grain classification in the ore classification process of the beneficiation plant. At the appropriate feed concentration, feed size (-200 mesh size content), and the difference between the size under the sieve and the feed size is less than 30% Under the conditions, the screening efficiency is as high as 70% or more.
Contact: Ms. Magie
E-mail: sale@aarealmachine.com
magiecn@gmail.com
WhatsApp/WeChat: 0086-15637361027
Website: https://www.aarealmachine.com
