Active Member
|
[China]
Address: 289 Yellow River Road, Xinxiang City, Henan Province, China
Contact name:Wang
Henan Pingyuan Mining Machinery Co., Ltd |
|
|
Galvanized Waterproof and Dustproof Belt Conveyor With Rain Covers Hoods
Introduction
Belt conveyor is composed by two endpoint pulleys and a closed conveyor belt. The pulley that drives conveyor belt rotating is called drive pulley or transmission drum; the other one-only used to change conveyor belt movement direction-is called bend pulley. Drive pulley is driven by the motor through reducer, and conveyor belt dragging relies on the friction drag between the drive pulley and the conveyor belt. The drive pulleys are generally installed at the discharge end in order to increase traction and be easy to drag. Material is fed on the feed-side and landed on the rotating conveyor belt, then rely on the conveyor belt friction to be delivered to discharge end.
Advantages and Features
1. Light in quality, good in strength, rainproof, windproof.
2. Corrosion-resistant, high-temperature resistant and long service
life.
3. Conveyor cover can prevent conveyor cover from being corroded
and rusted.
4. Snow-proof, aseismic proof, impact proof, and ultraviolet proof.
5. Good sealing, easy to operate, easy installation.
6. strict sealing structure, not afraid to step on, hard impact
deformation.
7. The waterproof cover has a fixed type, open type, and an observation window.
8. The conveyor belt is safer and more reliable during transportation.
Technical datas:
| Roller form | Running speed(m/s) | Belt width (mm) | |||||
| 500 | 650 | 800 | 1000 | 1200 | 1400 | ||
| capacity(m3/h) | |||||||
| Trough roller | 0.8 | 78 | 130 | -- | -- | -- | -- |
| 1.0 | 97 | 164 | 278 | 435 | 655 | 891 | |
| 1.25 | 122 | 206 | 348 | 544 | 821 | 1115 | |
| 1.6 | 156 | 264 | 445 | 696 | 1048 | 1427 | |
| 2.0 | 191 | 323 | 546 | 853 | 1284 | 1748 | |
| 2.5 | 232 | 391 | 664 | 1033 | 1556 | 2118 | |
| 3.15 | -- | -- | 824 | 1233 | 1858 | 2528 | |
| 4.0 | -- | -- | -- | -- | 2202 | 2996 | |
| Falt roller | 0.8 | 41 | 67 | 118 | -- | -- | -- |
| 1.0 | 52 | 88 | 147 | 230 | 345 | 469 | |
| 1.25 | 66 | 110 | 184 | 288 | 432 | 588 | |
| 1.6 | 84 | 142 | 236 | 368 | 558 | 753 | |
| 2.0 | 103 | 174 | 289 | 451 | 677 | 922 | |
| 2.5 | 125 | 211 | 350 | 546 | 821 | 1117 | |
Selection Conditions
♦ Material to be processed:
| ♦ Installation angle: ___°(if the installation is inclined) |
♦ Bulk density: t/m3 | ♦ Lifting height: ___m (if there is slope angle) |
♦ Water content: % | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Material temperature: °C | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material is corrosive or not: (Yes or No) | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
♦ Max. Granule size: mm | ♦ Working environment temperature: °C |
♦ Handling capacity: t/h | ♦ Working power supply: 3 Phase V Hz |
♦ Conveying length: m | ♦ Quantity: sets |
| ♦ Installation of the conveyor is inclined or not: ___ (Yes or No) |
