Active Member
|
[China]
Address: 289 Yellow River Road, Xinxiang City, Henan Province, China
Contact name:Wang
Henan Pingyuan Mining Machinery Co., Ltd |
|
|
Introduction
Dewatering screen, also known as high frequency dewatering screen, changes the water tension of the pulp surface by exciting force, and the pulp water becomes the material under the screen through the screen, while the fine material is blocked by the screen to form a filter layer which moves forward and discharges under the influence of vibration force.
Working Principle and Application
The dewatering screen adopts dual-motor self-synchronization
technology. The motors coordinate with universal eccentric and
adjustable amplitude vibrator. When the two motors start to work,
the vibrators move reversely at the same time. The centrifugal
forces is generated by the eccentric blocks will superpose
themselves and form a single direction vibration. The high
frequency vibration drives the screen move back and forth in line
repeatedly. So the sand can be dehydrated and filtered.
Advantages and Feathers
1. Less energy consumption,lower noise,longer service life
2. The beam and screen box are connected by high strength blot
without welding
3. High accuracy screening efficiency,simple and stable structure,
convenient maintenance
4. Suitable for rough screening with high capacity
5. Long travel distance for materials on the screen surface, high
screening efficiency
Technical datas:
| Model | Screen area (m2) | Mesh Size (mm) | Feeding Size (mm) | Frequency | Amplitude (mm) | Motor | Power (kW) | Capacity (t/h) |
| ZSM1542 | 6 | 0.25-13 | ≤300 | 800 | 9-10 | Y160M-4 | 11 | 30-60 |
| ZSM1556 | 8 | 13-50 | ≤300 | 800 | 10 | Y160L-4 | 15 | 30-60 |
| 2ZSM1556 | 8 | U:13-50 L:0.25-13 | ≤300 | 800 | 11 | Y160L-4 | 15 | 30-60 |
| ZSM1556B | 8 | 13-50 | ≤300 | 800 | 11 | Y132M-4 | 7.5×2 | 30-60 |
| 2ZSM1556B | 8 | U: 13-50 L:0.25-13 | ≤300 | 800 | 11 | Y132M-4 | 7.5×2 | 30-60 |
| ZSM1756A | 9.5 | 13-50 | ≤300 | 800 | 10 | Y160L-4 | 15 | 50-80 |
| 2ZSM1756 | 9.5 | U:13-50 L:0.25-13 | ≤300 | 800 | 10 | Y160L-4 | 15 | 50-80 |
| ZSM1756B | 9.5 | 13-50 | ≤300 | 800 | 10 | Y132M-4 | 7.5×2 | 50-80 |
| 2ZSM1756B | 9.5 | U:13-50 L:0.25-13 | ≤300 | 800 | 10 | Y132M-4 | 7.5×2 | 50-80 |
| ZSM1856 | 10 | 13-50 | ≤300 | 800 | 11 | Y160M-4 | 11 | 50-80 |
| ZSM2065 | 13 | 13-50 | ≤300 | 800 | 11 | Y180M-4 | 18.5 | 70-100 |
| 2ZSM2065 | 13 | U:13-50 L:0.25-13 | ≤300 | 800 | 1 | Y180M-4 | 18.5 | 70-100 |
| ZSM2065B | 13 | 13-50 | ≤300 | 800 | 9 | Y160L-4 | 11×2 | 70-100 |
| 2ZSM2065B | 13 | U:13-50 L:0.25-13 | ≤300 | 800 | 11 | Y160L-4 | 11×2 | 70-100 |
Selection Conditions
♦ Material to be processed:
| ♦ Screen layer/deck/sieve number:
|
♦ Bulk density: t/m3 | ♦ Mesh size of every screen layer/deck/sieve: mm |
♦ Material Temperature: ºC | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Water Content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material is corrosive or not: (Yes or No) | ♦ Drive: (Domestic or International brand or designated brand?) |
♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
♦ Max. granule size: mm | ♦ Working environment temperature: °C |
♦ Particle distribution percentage:
| ♦ Working power supply: 3 Phase V Hz |
♦ Handling capacity: t/h | ♦ Quantity: sets |
