Active Member
|
[China]
Address: 289 Yellow River Road, Xinxiang City, Henan Province, China
Contact name:Wang
Henan Pingyuan Mining Machinery Co., Ltd |
|
|
Introduction
Ultrasonic rotary vibrating sieve shaker is widely used in many
industries, covering food, chemical, ceramic, metallurgy, pollution
treatment, metallurgy powder, starch, flour, rice flour, carbon
powder, graphite powder, graphite powder, manganese powder, etc.
Working Principle
The vibration of Ultrasonic Vibrating Screen is produced by
eccentric weights on the upper and lower ends of the
motion-generator shaft. The direction of the eccentric weights can
change its rotational mode,rotation of the upper weight creates
vibration in the horizontal plane, which causes material to move
across the screen cloth to the periphery,while the lower weight
acts to tilt the machine, causing vibration in the vertical and
tangential planes.
Advantages and Features
1. Enclosed design, good sealing, zero dust pollution, environmental friendly
2. Unique screen frame design, convenient and easy for dismounting
3. Discharge outlet can be adjusted to any direction based on client’s need
4. Low energy consumption,low noise pollution,smooth operation,high sieving efficiency
5. Bouncing balls are provided to prevent blockage of the screen mesh
6. The amplitude and motion of the material are adjustable to meet various requirement
7. Material distributor available at inlet section to ensure evenly distribution on the screen
8. Complete models with different machine diameters to satisfy various capacity requirement
Technical Parameters
| Model | Nominal Diameter(mm) | Screen Diameter(mm) | Screen Surface Area(m3) | Feeding size (mm) | Specification | NO. of Layers | Frequency(rpm) | Power(Kw) |
| XZ-400 | 400 | 340 | 0.09 | <10 | 2-325 | 1-5 | 1500 | 0.18 |
| XZ-600 | 600 | 530 | 0.22 | <10 | 0.25 | |||
| XZ-800 | 800 | 720 | 0.4 | <20 | 0.55 | |||
| XZ-1000 | 1000 | 900 | 0.63 | <20 | 0.75 | |||
| XZ-1200 | 1200 | 1100 | 0.95 | <20 | 1.1 | |||
| XZ-1500 | 1500 | 1400 | 1.5 | <20 | 1.5 | |||
| XZ-1800 | 1800 | 1710 | 2.3 | <30 | 2.2 | |||
| XZ-2000 | 2000 | 1910 | 2.86 | <30 | 3.7 |
Note: the parameter above is just for reference,it can be
customized by different requirment.
Selection Conditions
| ♦Material to be processed: _____ | ♦Max. granule size of the feeding material: _____mm |
| ♦Handling capacity (Ps. It means the total | ♦Layer number: ______ |
| material capacity feeding from the inlet): _____t/h | ♦Mesh size of each layer: _____mm |
| ♦Bulk Density: _____t/m3 | ♦Particle distribution percentage:____________ |
| ♦Material temperature: _____ºC; | (please check the following example to help you |
| ♦water content:____% | understand it.Supposing the layer number is 2 |
| ♦Material is corrosive or not: ____ (Ps. Yes or No) | and the aperture size of each layer is 10mm and 5mm, |
| ♦Material is sticky or not: ____ (Ps. Yes or No) | then you will get 3 kinds of products: X,Y and Z. |
| ♦Working environment is indoor or outdoor: _____ | X≥10mm; 5mm≤ Y < 10mm; Z<5mm. |
| ♦Working environment temperature: ______ ºC | We want to confirm the following information: |
| ♦Upstream equipment (Ps. It means what kind of | 1)The percentage of X in the whole material:_____%; |
| equipment is used to feed the material): _____ | 2)The percentage of Y in the whole material:_____%; |
| ♦Downstream equipment (Ps. It means what kind of | 3)The percentage of Z in the whole material:_____%;) |
| equipment is used to discharge the material): _____ | ♦Working power supply: _____V ______HZ |
