Sine Force 30KN Electrodynamic Vibration Shaker , 380V Vibration Shaker Table Systems

Sine Force 30KN 100G Electrodynamic shaker With 4 Inputs Vibration Controller

Electrodynamic Shaker Capabilities

• Sine: 3,000 kgf (peak)
• Random: 3,000 kgf (rms)
• Shock: 6,000 kgf (peak)
• Frequency range: 2 Hz to 3 kHz
• Maximum Velocity: 2.0m/s
• Maximum Acceleration: 100G (half sine) with a bare armature
• Maximum payload: 400 kg
• Maximum displacement: Shock: 51 mm (p-p)

Shock and Vibration Testing  Machine Working Principle:

Shock and Vibration Testing  Machine Specifications: EV103-EV220

Shock and Vibration Battery Testing Solutions

Batteries power many of the things that enable and fulfill our everyday lives. As our lives have become less tethered – devices have surely become more efficient – but also – batteries now provide higher energy densities.

Think for a moment about shipping all these batteries…In very real terms – a shipment can represent a huge energy density – and in a mishap – that energy could be released in a very undesirable way.

Most batteries undergo transportation simulation tests to comply with international shipping standards. This is especially true for lithium ion batteries. To ensure safety during shipment, lithium batteries must be tested per UN/DOT specifications. The UN Manual of Tests and Criteria section 38.3 (UN/DOT 38.3) outlines the tests for lithium batteries. Labtone has the Test Equipment and expertise to perform (UN/DOT 38.3) tests–T3 (Vibration), T4 (Shock), and T6 (Impact).

Transport hazards are not the only dynamic conditions that battery designs must survive. When a portable electronic device sheds it packaging upon receipt, you may find the everyday use environment to be more rigorous than the shipping environment. In an automotive electric / hybrid application, batteries will be exposed to endless vibration as a matter of course. A variety of industry specifications exist for testing batteries to ensure that they can stand up to this type of use:

• IEC 62133 (Vibration, Drop, Shock)
• SAE J2464 (Shock, Drop, Data Acquisition)
• UL 2054 (Shock, Vibration)
• UL 2202 (Vibration, Drop)
• UL 2231 (Drop, Shock, Vibration)