Active Member
|
[China]
Address: S&T Building, Baiwang Xin Industrial Park, Xili,Nanshan District, Shenzhen, China,518055
Contact name:Tim
Shenzhen Kinda Technology Co., Ltd |
|
Low Voltage AC Drives Applied In Circular Knitting Machine (textile)
1, Load feature
Circular Knitting Machine is widely used in the textile industry,
it’s usually started by external signal, speed is
controlled by external analog signal.
The running speed is high, start torque is high, and also the
system always needs fast stop.
2, Requests for AC Drive (VFD)
(1) Big output torque at low frequency.
(2) Fast response during start.
(3) Running smoothly during running.
(4) Stop smoothly and accurately, without reverse.
3, Onsite picture
4, Typical wiring diagram
5, Parameters setting list
| No. | Function codes | Default | Setting value | Explanation |
| 1 | F0-02 | 0 | 1 | External start / stop signal |
| 2 | F0-03 | 1 | 2, 3, 4 | The speed is controlled by external signal |
| 3 | F0-10 | 50 | 80 | Maximum frequency |
| 4 | F0-12 | 50 | 80 | Frequency upper limit |
| 5 | F0-17 | Model depend | 5s | Acceleration time (adjustable) |
| 6 | F0-18 | Model depend | 0.5s | Deceleration tiem (adjustable) |
| 7 | F1-17 | 0 | 2 | S-curve ACC / DEC B |
| 8 | F1-11 | 0 | 1.5 | DC braking start frequency while stopping |
| 9 | F1-13 | 0 | 60 | DC braking current while stopping |
| 10 | F1-14 | 0 | 0.8s | DC braking time while stopping |
| 11 | F6-02 | 2 | 2 | Fault output |
| 12 | F8-13 | 0 | 1 | Reverse forbidden |
6, Notices
(1) Maintenance regularly, pay attention to ventilation, heat sink,
and dust prevention.
(2) Before running the machine, remove the load and adjust the
motor running direction to be correct.
(3) Pay special attention on the reversal while stopping, a slight
reverse will cause damage to the dial, customer can change the
S-curve mode or fine tuning the DC braking parameters to remove the
reversal.
