|
[China]
Trade Verify
Address: No.16 Liyu Street, DongYong Town, Nansha District, Guangzhou, China
Contact name:
Guangzhou Juchuan Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
Hand Rubber Molding Machine For Making Rubber Diaphragm Of Valves
How to operate this machine?
Initial state →Put the material into the mould, repos it the ejector cylinder →Load the mould →Close the mould quickly→ Clamp the mould slowly, increase pressure →Exhaust→ Vulcanization start →Vulcanization finish→ Open mould quickly→ Pushing out the mould →Ejector cylinder works, and separate mould and product→ Take out the product
The attentions for using flat vulcanizing machine:
1. Operation pressure should not exceed the rated pressure.
2. The minimum size of the mold must not be less than the diameter of the plunger. The mould should be placed in the middle of the hot plate, and the working fluid pressure should be adjusted according to the size of the mold and the curing time.
3. When stops using, the total power supply it should be cut off.
4. The column nut must be tightened and tightened regularly.
5. When empty cars are tested, they must put 60mm thick backing plates in the flat.
6. Mainframe and control box should have reliable grounding
7. Each contact must be clamped to check periodically whether there is any loosening.
8. Keep the electrical components clean, and the instruments must not be impacted or knocked.
Technical parameter:
Model | Unit | 100HF | 160HF | 200HF | 250HF |
Clamping Force | Ton | 100 | 160 | 200 | 250 |
Operation table size | mm | 400*460 | 500*520 | 550*560 | 650*600 |
Plunger stroke | mm | 200 | 250 | 250 | 250 |
Distance of | mm | 200~300 | 250~350 | 250~350 | 250~350 |
Thermo-plate | |||||
Distance of Tie bar | mm | 490*230 | 590*270 | 640*310 | 745*310 |
Die sinking type | Track-Suspension-2RT-3RT-4RT | ||||
Max Operating | Mpa | 20 | 20 | 20 | 20 |
Pressure | |||||
Motor Power | hp | 7.5*2(5.5kw*2) | 10*2(7.5kw*2) | 10*2(7.5kw*2) | 10*2(7.5kw*2) |
Electric Heating | Kw | 7.2*2 | 11.7*2 | 13.5*2 | 15.3*2 |
Power | |||||
Total Power | Kw | 25.4 | 38.4 | 42 | 45.6 |
Gross weight | Ton | 5 | 6 | 7.8 | 11 |
Dimension(L*W*H) | mm | 2500*2080*1950 | 2800*2260*1900 | 2930*2350*2050 | 3190*2780*2230 |
Machine detials
Related product:
 |  |
|
Shipping and packing
Company information
Guangzhou JuChuan Machinery Co.,Ltd was established in 1997. We are mainly specializing in producing silicone/rubber injection molding machines, Vacuum compression molding machines, plate vulcanizing machine, “all-in-out” ,liquid silicone injection machine, ”first in first out” ,”first in last out”, vertical and horizontal silicone/rubber injection machine for 20 years.
We have a special company patent: Anti-collision Molding System prevent mold damage occurring form misalignment.
Trade show
Thailand Exhibition Show:
Our service:
1. Free technology training: you can come for inspection and training for free.
2. Free Installation and debugging: Our engineers will teach you about the installation and debugging for free.
3. After-sales service: We will supply the free repairmen on this machine for one year, but will supply the maintenance lifetime. (The service is only for natural damage)
4. Online remote control for software problems, whatspp or wechat for video checking.
