Dongguan Jintong Plastic Machinery Co., Ltd. |
Verified Suppliers
|
|
55T Vertical Plastic Injection Molding Machine With Rotary Table Offered By Guangdong
Model | JTT-550R | ||
Injection system | Screw Diameter | mm | 40 |
Injection Pressure | kg/cm2 | 1260 | |
Theoretical Shot Volume | cm3 | 170 | |
Injection Rate | cm3/sec | 113 | |
Screw Stroke | mm | 140 | |
Screw Speed | rpm | 150 | |
Heating Capacity | kw | 5.3 | |
Clamping system | Clamping Force | tons | 55 |
Opening Force | tons | 8.9 | |
Min Mold Height | mm | 200 | |
Opening Stroke | mm | 200 | |
Max Open Daylight | mm | 400 | |
Mold Dimension | mm | 370*450 | |
Rotary Table Diameter | 1080 | ||
Ejector Force | tons | 1.8 | |
Ejector Stroke | mm | 60 | |
Other | Motor Power | kw | 7.5 |
Sliding Table Stroke | mm | — | |
Machine Dimension | m | 2.6*1.8*2.85 | |
Machine Weight | tons | 3 |
1) vertical clamping, vertical injection,
2) clamping force, injection weight and shot speed can be changed according to actual demand.
3) 2 stations, 3 stations , multi-station(one up die, two or four down die), easy for operate insert parts, improve productivity
PRODUCT ADVANTAGE
Energy-saving: save 30% energy compared to similar products by
using SIFU pump system
High efficiency: SIFU motor have max speed 2200/min to increase oil
pump output and improve more than 15% productivity speed
Low heating: save 55% cooling water quantity at least compared to
similar products
Low noise: optimize motor working condition with imported bearing
and oil pump to reduce 15-20db working noise
Precision: use completely close-cycle control with pressure sensor
and motor rotary encoder to improve product consistency
SERVICE ADVANTAGE
17 years of customer service experience and summarizing customer feedback, Jintong develop a systematic and standardized service process, and also establish 24 hour response mechanism to wensure timely solve customers problems and offer perfect service to customers as soon as possible.
91.8% Response Rate
91.8% Response Rate
91.8% Response Rate