Hefei Hengcheng Industrial Equipment Technology Co., Ltd |
Verified Suppliers
|
|
Large Output Vertical Powder Grinding Mill For Feldspar Barite Dolomite Powder Plant
Description
【Applicable Materials】
It has high-yield and efficient grinding capacity for various non-metallic minerals with Mohs hardness below 7 and humidity within 6%, such as cement raw meal, clinker, power plant desulfurized limestone powder, slag micropowder, It has good grinding effect on manganese ore, gypsum, coal, barite, calcite, bauxite, etc.
【Scope of Application】
Widely used in electric power, metallurgy, cement, chemical industry, building materials, coatings, papermaking, rubber, medicine, food and other production and life fields.
【Working Principle】
The motor drives the grinding disc to rotate through the reducer,
the material falls into the center of the grinding disc from the
feed inlet, and the hot air enters the mill from the air inlet.
Under the action of centrifugal force, the material moves to the
edge of the grinding disc, and is crushed by the grinding roller
when passing through the annular groove on the grinding disc. The
crushed material is carried by the high-speed airflow at the air
ring at the edge of the grinding disc, and the large particles fall
directly on the grinding disc. Re-grinding, when the material in
the airflow passes through the dynamic and static separator, under
the action of the rotating rotor, the coarse powder falls on the
grinding disc for re-grinding, and the qualified fine powder is
ground together with the airflow and collected in the powder
collecting device, which is product. Moisture-containing materials
are dried during contact with hot gas to achieve the required
product moisture.
Technical Parameters Table
Specifications | HVM800 | HVM1250 | HVM1300 | HVM1500 | HVM1700 | HVM1750 | HVM1900 | HVM2400 | HVM2400 | HVM2500 |
Grinding table median diameter(mm) | 800 | 1250 | 1300 | 1500 | 1700 | 1750 | 1900 | 2400 | 2400 | 2500 |
Capacity(t/h) | 1-3 | 2-7 | 3-12 | 4-16 | 6-24 | 7-27 | 7-28 | 9-35 | 10-39 | 11-45 |
Materials Grain Size(mm) | 0-15 | 0-20 | 0-25 | 0-35 | 0-35 | 0-35 | 0-40 | 0-40 | 0-40 | 0-50 |
Materials Moisture(%) | <5 | |||||||||
Product Fineness(10-40um) | 97% | |||||||||
Product Moisture(%) | ≤1 | |||||||||
Main Motor Power(kw) | 55 | 132 | 180 | 250 | 355 | 400 | 450 | 560 | 630 | 710 |
Re:The data based on Mohs'hardness 3-4 material
The product fineness can reach 10 um(1250 meshes)
【Performance Advantage】:
1, High grinding efficiency
2, low power consumption
3. The feeding granularity is large and the product fineness is
easy to adjust
4, the equipment process is simple
5. Small footprint, low noise and small dust
6, Low operating cost and low consumption of wear-resistant
materials