Home Companies Hefei Hengcheng Industrial Equipment Technology Co., Ltd

Fly Ash Conveying Silo Pump High Degree Automation Dense Phase Pneumatic Conveying Equipment

Hefei Hengcheng Industrial Equipment Technology Co., Ltd

Contact Us

[China] country

Trade Verify

Address: No. 56, Dalian Road, Baohe District, Hefei City, Anhui Province,China

Contact name:Margo

Inquir Now

Hefei Hengcheng Industrial Equipment Technology Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Fly Ash Conveying Silo Pump High Degree Automation Dense Phase Pneumatic Conveying Equipment

Country/Region china
City & Province hefei anhui
Categories Pumps
InquireNow

Product Details

Fly Ash Conveying Silo Pump / High Degree of Automation / Dense Phase Pneumatic Conveying Equipment

 

Description

Introduction to silo pneumatic conveying pump:
The silo pneumatic conveying pump adopts a positive pressure pneumatic conveying method to transport powdered materials, and is widely used in the transportation of materials such as fly ash, cement, cement raw materials, mineral powder, etc. in power plants.
This equipment adopts a PLC control system, which can be automatically or manually controlled. After long-term practical operation, it has been proven that the equipment has stable performance, reliable quality, and no dust pollution during transportation. It is an ideal pneumatic conveying equipment.
The transportation pipeline can be flexibly arranged according to the terrain conditions, achieving centralized, dispersed, high altitude, and long-distance transportation. The transportation process is not affected by natural conditions, ensuring that materials are not affected by moisture and are environmentally friendly and pollution-free.

 

Features:
The bin type conveying pump is a system that uses an air compressor as the air source, forming a high-pressure dense phase conveying state. It has the characteristics of low flow rate, low wear, and low air consumption. The single bin pump achieves intermittent conveying, while the double bin pump can achieve continuous conveying.
The warehouse pump feeding system needs to achieve a specific conveying form and has unique requirements for the characteristics of the material. It must be powder and have good flowability, and different media need to adjust different gas quantities and pressures.
The configuration of the warehouse pump feeding system is relatively complex, including inlet valve, outlet valve, exhaust valve, pressure gauge, material level gauge, intake valve group, pressure regulating valve group, control system, etc. It is a highly automated and integrated feeding system.

 

Large Capacity Pneumatic Conveying Bin Pump Parameter Table

Conveying MaterialBulk Density (t/m3)ModelPCD24/HPCD26/HPCD28/HPCD30/HConveying Distance
Specification16~20m318~22m320~27m326~32m3Level (m)Level (m)
Pulverized Coal0.5Delivery Volume (t/h)50~8060~9065~11080~13020020
Fly Ash0.7575~12585~13095~160125~19020020
Limestone Powder/Mineral Powder0.880~13090~140100~170130~20020020
Cement/Raw Meal1100~150115~175130~215165~26020020


Long-distance Pneumatic Conveying Bin Pump Parameter Table

Conveying MaterialBulk Density (t/m3)ModelPCD24/LPCD26/LPCD28/LPCD30/LConveying Distance
Specification16~20m318~22m320~27m326~32m3Level (m)Level (m)
Pulverized Coal0.5Delivery Volume (t/h)20~4025~4530~5545~65100025
Fly Ash0.7535~6045~6545~8065~95100025
Limestone Powder/Mineral Powder0.840~6545~7050~8570~100100025
Cement/Raw Meal150~8055~9065~11090~120100025
 

 

Conventional Grid Pneumatic Conveying Bin Pump Parameter Table

Conveying MaterialBulk Density(t/m3)ModelPCD18/NPCD20/NPCD20/NReference Conveying Distance
Specification5.0~6.7m37.0~10.0m310.0~15.0m3Level (m)Vertical (m)
Pulverized Coal0.5Delivery Volume (t/h)12~2016~3225~5050030
Fly Ash0.7518~3225~4835~7050 
Limestone Powder/Mineral Powder0.820~3526~5138~7550030
Cement/Raw Meal1.024~4232~6548~9550030
Silicon Powder1.228~5040~7555~11550030
 

 

Parameter Table Of Small Size Pneumatic Conveying Bunker Pump

MaterialBulk Density(t/m3)ModelPCD08/MPCD10/MPCD12/MPCD14/MReference Conveying Distance
Specification0.2~0.5m30.6~1.6m31.5~2.5m32.5~5.0m3Level (m)Vertical (m)
Pulverized Coal0.5Delivery Volume (t/h)0.5~1.81.5~5.55.0~9.08.0~18.010020
Fly Ash0.750.9~2.82.5~8.57.0~14.012.0~27.010020
Limestone Powder/Mineral Powder0.81.0~3.03.0~9.08.0~15.012.0~28.010020
Cement/Raw Meal1.01.2~3.53.5~11.510.0~18.016.0~36.010020
Silicon Powder1.21.5~4.04.5~13.512.0~20.019.0~43.010020

Working principle of bin pump:
The working process of the bin pump is divided into four stages:
Feeding stage: The feeding valve and exhaust valve are opened, and the material freely falls into the pump body. When the material is full, the level gauge sends a signal, and the feeding valve and exhaust valve automatically close to complete the feeding process;
Fluidization and pressurization stage: Open the intake valve, compressed air enters the upper and bottom of the pump body, pressurizes the upper part, and diffuses the lower air through the fluidized bed, causing the material to be in a fluidized state, while the pressure inside the pump increases;
Transportation stage: When the pressure inside the pump reaches a certain value, the pressure gauge or pressure switch sends a signal, and the discharge valve automatically opens. The material fluidization on the fluidized bed strengthens, and transportation begins. The material inside the pump gradually decreases. At this time, the material on the fluidized bed is always in a state of fluidization and transportation;
Purging stage: When the material in the pump is delivered and the pressure drops to the resistance of the pipeline, the pressure gauge or pressure switch sends a signal, and the ventilation continues for a certain time. Compressed air is used to clean the pipeline, and then the inlet valve is closed. At a certain interval, the discharge valve is closed, and the inlet valve is opened to complete a conveying cycle.


Packaging and delivery
1. Standard packaging.
2. A well-trained and disciplined packaging team.
3. After sales service. After receiving the product, if you have any questions or questions, please feel free to contact us at any time. The problem will be resolved immediately for you.
4. Experienced and professional logistics agents.

Hot Products

Coal Vertical Mill 40 T/H Coal Mill / Energy Saving Vertical Coal Mill / High Production Low ...
Coal Mill, Energy-Saving Environmentally Friendly Vertical Mill, Lime Vertical Mill Product ...
20tph Bituminous Coal Anthracite Vertical Mill - Equipment For Producing Clean Coal Powder Product ...
Coal Vertical Mill - Large Vertical Coal Mill / Fly Ash Grinding Equipment With High Production ...
Coal Vertical Mill 40 T/H Vertical Coal Mill Energy-Saving High Production Low Consumption Coal Mill ...
Coal Vertical Mill Power Plant Coal Mill Blast Furnace Injection Coal Powder Vertical Mill Product ...