Active Member
|
[China]
Address: BLOCK 64 FUMIN INDUSTRY ,PINGHU TOWN,LONGGANG DISTRIC ,SHENZHEN CITY
Contact name:LISA XIAO
SHENZHEN JOINT TECHNOLOGY CO.,LTD |
|
|
Flat Bed CNC Lathe Machine Metal Cut Turning Machine
1. A high strength ,widening the carriage ,suitable for heavy
cutting
2. Four station electric tool post
3. Structure of spindle box: 3 grades gear speed
4. Standard configuration: manual chuck
Optional chuck available
1. Machine body guide way are quenched for better resistance of
abrasion, and increased stability and
accuracy.
2. 6136, 6140 machine employ intergrated body structure, and extra
wide guide way with better vibration
resistance.
3. Spindle, saddle adopt special structure and technology, which
increase precision, stability and accuracy.
4. Models above 6150 adopt gear box transmission design, and are
equipped with inverter spindle motor
which can enable strong cutting force with 3-level gear speed, and change
rotation speed by controller
system at each speed level.
5. Optional control system: GSK Control system, KND control system
and Fanuc mate control system.
| Item | Unit | CK-6150 |
| Max swing over table | mm | 500 |
| Max swing diameter over carriage | mm | 290 |
| Spindle head | D8 | |
| Max processing length | mm | 1000 |
| X axis Travel | mm | 295 |
| Z axis Travel | mm | 800 |
| Spindle through hole diameter | mm | 82 |
| Spindle motor | kw | 7.5 |
| Spindle rotation speed | rpm | Spindle 3 grades gear box: 45-180, 180-750, 600-1600r/min |
| Servo motor connection type | Direct connection | |
| X axis rapid feed | m/min | 6 |
| Z axis rapid feed | m/min | 8 |
| Tool width*height | mm | 20*20 |
| Turret center height | mm | ≤145 |
| Tailstock Shaft diameter*travel | mm | φ75*120 |
| Tailstock taper | MT5 | |
| Positioning accuracy | mm | 0.01 |
| Power | kw/h | 10 |
| Dimension | mm | 2490*1420*1600 |
| Net weight | kg | 2300 |
| 1 | GSK 980TDi Controller system with servo motor and driver | 7 | 4 position electronic turret |
| 2 | Working light | 8 | 3 jaw chuck |
| 3 | Spindle | 9 | Leveling pad |
| 4 | Auto lubrication system | 10 | Manual tailstock |
| 5 | Machine cover | 11 | Tools and toolbox |
| 6 | Operation unit | 12 | Technical documents |
