|
[China]
Trade Verify
Address: 4F, Building 5, Dongluyang Industrial ,Park, No. 4, Tengfeng 4th Road, Fuyong Phoenix Third, Industrial Zone, Baoan District, Shenzhen China
Contact name:Terry
Shenzhen Veikong Electric Co., Ltd. |
|
Verified Suppliers
|
|
|
380V 220V Three Phase Solar Inverter Solar IP20 IP65 VFD Controller
MPPT 99.9% Solar pump inverter 75kw 100hp 90kw 120hp 110kw 150hp
solar vfd
Electrical Specifications and Power degree
| 220V | 380V | |
| Max input DC voltage | 450V | 810V |
| DC voltage range | 150~450VDC | 300~810VDC |
| Normal working DC voltage | 260V-400V | 400V-650V |
| Recommended input mppt voltage | 330V | 550V |
| MPPT efficiency | >99% | |
| Rated output voltage | 1/3-phase 220VAC | 3-phase 380-480VAC |
| Output frequency range | 50/60Hz | |
| Max efficiency of the machine | 99% | |
| Power range | 220v 0.75kw to 75kw, 380v 1.5kw-160kw | |
| Cooling method | Air cooling | |
| Protection degree | IP20/IP65 | |
| Altitude | Below 1000m; above 1% for every additional 100m. | |
| Standard | CE/ROHS | |
Noted: We suggest solar panel power should be 1.3-1.4 times higher
than solar pump power ,
And solar pump inverter power should be higher level than solar
pump.
When solar pump distance to inverter higher than 100m,
It should be equipped with Output reactor or higher level power
inverter.
For Solar panel,total VOC less than Maximum DC voltage of inverter
and Solar panel vmp is recommend
530V for 380V pump and 305V for 220V pump.
For 220V single phase motor connection
1: Single phase asynchronous motor wiring method (without starting
capacitor):
Notice: U is connected to the common end of the starting winding
and the working winding, V is connected to the starting winding,
and W is connected to the working winding;
Single-phase asynchronous motor if the rotary steering is not
correct, you can change the V and W wiring or set P22.13=1.
First solution: Set parameter P11.01=1 (Single phase motor type without capacitor) or second solution: set P00.11=31 if your motor frequency is 50
hz or set P00.11=32 if your motor frequency is 60HZ
For 220V single phase motor connection
2:Single-phase asynchronous motor wiring method (with capacitor)
Notice1:First solution: Connect motor cable to power terminal U and V and enter BSC mode to
Set parameter P23.15=0(output phase loss shielding protection) or second solution: set macro P00.11=21 if your motor frequency is
50HZ or set P00.11=22 if your motor frequency is 60HZ
