Home Companies Shenzhen Veikong Electric Co., Ltd.

VEIKONG 380v Three Phase AC EMI VFD Filter Electromagnetic Interference Filter

Shenzhen Veikong Electric Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: 4F, Building 5, Dongluyang Industrial ,Park, No. 4, Tengfeng 4th Road, Fuyong Phoenix Third, Industrial Zone, Baoan District, Shenzhen China

Contact name:Terry

Inquir Now

Shenzhen Veikong Electric Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

VEIKONG 380v Three Phase AC EMI VFD Filter Electromagnetic Interference Filter

Country/Region china
City & Province shenzhen
Categories Electric Power Tools
InquireNow

Product Details

380v Three Phase AC EMI Filter electromagnetic interference filter

 
EMI Power Line Filter from the LC low-pass passive network components.It uses principles of impedance mismatch,so that by
the attenuation of electromagnetic interference signals.
Filter filtering effect depends on the extent of impedance mismatch,the greater the impedance difference, the better the
filter. For example,to get better results, for low-impedance power supply side, should be accompanied by a high input
impedance of the filter;pairs of high input impedance of the load side, then the filter with low output impedance.

 

Product Features

 

This catefory of products has superior capability of interference containment and can be applied to data processing system, telecommunication equipment inverter and power conditioning equipment that impose high requirement on interference containment.

 

Rataed Voltage: AC 380V-440V

Test Voltage (1minute): Phase to Phase DC 1500V; Phase to Ground AC 1500V / DC 2500V

Operating Frequency: 50/60HZ

Range of temperature: -25-85℃

Insulation Resistance: Phase to ground (up to 300A) ≥ 1500MΩ

 

 

ModelLow Pass EMI Filter 
Transfer FunctionLow Pass
Package TypeSurface Mount
Nominal Center Frequency10K-30MHZ
Insertion Loss60~90dB
Input Impedance50Ω
Rated Voltage380V/440V
Rated Current1A-100A
Environmental Temperature40°C
Temperature Range25 / 085 / 21
Operating Frequency50/60HZ
Line to Line1450VDC
Line to Ground2250VDC or 2000VAC
Maximum Leakage Current115VAC/60HZ 1.4mA Max. 250VAC/60HZ 2.5mA Max
MOQ5pcs
PriceUSD60~80/Meter
Lead Time5~15 weekday for Low Pass EMI Filter

 

 

 
Filter instructions
 
Consider the selection of the main filter insertion loss,the manufacturer of the given curve (parameters) in general in the
standard 50-system test results are only for reference, but the actual applications are generally not 50 systems, insertion loss will
be some offset.
Filter selected second point to note are: operating voltage, operating current, voltage value, leakage current, dimensions,
installation methods; special requirements and special applications must be described when ordering.
DIN-type security choice of terminals: DIN security terminal has the following features: touch security; internal solid, has great
access to cross-sectional area;in line with European industry standards,than conventional terminals safer and more convenient;
use of DIN terminal of the filter is more in line with European market requirements. Most of the products of SIKES to support the
kinds of terminal mode.

 

 

 

 

Insertion loss
Insertion loss (IL) is the ratio that filter access port voltage of the circuit before and after, be expressed with the following:
Insertion loss (IL) = 20LgV1/V2
Where: V1- the interference signal voltage before filter access
V2- the interference signal voltage after filter access
Insertion loss test methods are detailed in the CISPR17 requirements. In general, product samples provided on the insertion
loss curve is obtained in the 50Ω system: the assumption on both sides of the output power and load, input impedance is
resistive to 50Ω. As the actual use of the environment in the power side and load side of the impedance vary greatly, so
when you get the actual use of the insertion loss values and the samples of different nominal values of insertion loss.
Therefore, the selection of EMI power filter is the best way to access equipment that it carried out the actual tests

 

Hot Products

5.5KW 7.5KW 11KW 15KW 18.5KW VFD AC Drive Manufacturer Vector Control 5.5KW 7.5KW 11KW 15KW 18.5KW ...
AC 380v 220v IP20 OVP VFD Variable Frequency Drive Manufacturers 30kw 40hp variable frequency drive ...
VFD Variable Frequency Inverter For Heavy Load 30kw 37kw 45kw 55kw VFD ac drive frequency inverter ...
380V Input VFD Variable Frequency Drive 0.75kw To 710kw Three Phase AC drive vfd variable speed ...
7HP 10HP 15HP 25HP 30HP Frequency Inverter AC Drive With Vector Control Product Advantages 1, With ...
560KW 630KW 710KW Frequency Drive For AC Motor Crusher Machine High performance 1. More Accurate ...