|
[China]
Trade Verify
Address: 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China
Contact name:Keira
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd |
|
Verified Suppliers
|
|
|
Speed Adjustable Auto Reverse DC Brushless Barrier Car Park
Barriers Compatible With Traffic Light
Car Park Barriers Parameter:
1. Working temperature(motor): -30℃~+70℃
2 Rated voltage:DC24V
3 Running speed:1.5s-8s
4 Rated current:9.5A
5 Rated power:160W
6 No-load speed:1850rpm
7 Rated speed:1400rpm
8 Rated torque:59.6N.m
9 Relative humidity:≥85%
10 Remote control distance:≤100M(in the open place)
11 IP Degree:IP44
12 Max length of arm:6M
| Menu code | Parameter Scale | Parameter name | Default | Unit | Remark |
| H00-00 | 25-95 | Open speed adjustment | 40 | Corresponding PWM duty | |
| H00-01 | 25-95 | Close speed adjustment | 40 | Corresponding PWM duty cycle | |
| H00-02 | 5-40 | Open in place decelerate angle | 35 | The larger the angle value, the | |
| H00-03 | 5-40 | Close in place decelerate angle | 35 | The larger the angle value, the | |
| H00-04 | 1-20 | Open accelerate adjustment | 1 | ms | The smaller the number, the |
| H00-05 | 1-20 | Close accelerate adjustment | 8 | ms | The smaller the number, the |
Fault code:
| EFF01:Hall error | Check motor or wiring connection | Generally, the motor or motor |
| EFF02.Under-voltage fault | The voltage is lower than 22.0V | Power supply or the battery |
| EFF03.Over current protection | The load is too heavy or the drive | Check whether the motor |
EFF04.Locked rotation | The limit has not been reached in place | Reset the limit point, or |
Menu code Parameter Arm length | UP ARM | DOWN ARM | ||||
| H00-00 | H00-02 | H00-04 | H00-01 | H00-03 | H00-05 | |
| Medium Octagonal arm 3m 1.8s(without rubber) | 95 | 30 | 8 | 95 | 30 | 8 |
| Medium Octagonal arm 3m1.8s(with rubber) | 95 | 25 | 8 | 95 | 25 | 8 |
| Large Octagonal arm 4.5m 3s(without rubber) | 45 | 30 | 10 | 45 | 30 | 10 |
| Large Octagonal arm 6m 5s(with rubber) | 35 | 40 | 10 | 35 | 40 | 10 |
| 3m round arm 1.8s | 95 | 25 | 8 | 95 | 25 | 8 |
(the parameter is based on the company’s arm)
10.1 Keep the barrier gate clean
10.2 Check the joints ever month in case of any loose parts.
10.3 Check the spring elasticity after the barrier gate running 3000 times.
10.4 Check the easily worn-out parts(like the spring,limit switch),every half year and renew it.
10.5 Remote control distance will be shortened or not work in case like big object screening,battery exhausting,extreme weathers.
