|
[China]
Trade Verify
Address: 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China
Contact name:Keira
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd |
|
Verified Suppliers
|
|
|
CE Certificate Automatic Sliding Gate Motor For Garage Door Opener
sliding gate motor description
Each kit includes:
Functions of Sliding gate opener:
Packing list | |||
Name | Quantity | Unit | Remark |
Sliding gate operator | 1 | set | Necessary |
Remote control | 2 | pcs | Necessary |
Internal hexangular bolt | 4 | pcs | M8*40 |
Internal hexangular bolt | 4 | pcs | M6*16 |
Left limit iron | 1 | pcs | Necessary |
Right limit iron | 1 | pcs | Necessary |
Base board | 1 | pcs | Necessary |
Release key | 2 | pcs | Necessary |
Manual | 1 | pcs | Necessary |
Infrared photocell | 1 | set | Optional |
Radio emitter | 1 | set | Optional |
FAQ:
1 The motor runs but the sliding gate operator doesn't work.
A: Check whether the clutch is closed.
2 The power indicator light doesn't flash and the key doesn't
react.
A: Check whether power is connected right.
B: Check whether the fusel is burned, it yes, please exchange it.
3 The opening and closing limit can not work.
A: Check whether the limit adjustment switch is installed right.
B: Check whether the limit iron is installed right. Adjust the
position of the limit iron.
4 Crash proof is not effective.
A: Check whether the connection of crash proof is correct.
B: Check whether the photocell is installed right.
C: Check whether the connection of the wire of the loop
detector is right .
5 When the gate just close up, it turns to open.
A: Check whether the voltage is normal.
B: If the crash proof equipment is installed, please check
whether it works well.
6 The remote control doesn't work
A: Check whether the battery is low. If yes, change it.
B: Check whether the code of the remote control is the same
with the code of the control panel.
