|
[China]
Trade Verify
Address: 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China
Contact name:Keira
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd |
|
Verified Suppliers
|
|
|
Multi function Automatic Traffic Barrier Gate Operator for External Device , AC230V 50Hz
Function:
1. The core technology employs the special AC220V torque motor
a. maintenance-free motor, work normally under extremely climates
b. use sine generator to reduce mechanical failure greatly
c. power protection in case of instant heavy current, voltage fluctuation
2. All-round safety protection
a. collision prevention
b. LED traffic signal (optional)
c. infrared ray protection (optional)
d. remote control (optional)
e. falling protection (optional)
| 1 | Power | AC220C±10V,50/60HZ; |
| 2 | Machine core | Automatic |
| 3 | Operating Temperature | -45℃-60℃ |
| 4 | Relative Humidity | ≤95%, No Condensation |
| Running time | 1 sec | 3 sec | 6 sec | 3 sec | 6 sec | 3 sec | 6 sec | 3 sec | 6 sec |
| Boom type | Straight | 90°folding | 180°folding | 2 fence | 3 fence | ||||
| Max boom length | 3m | 4.5m | 6m | 3m | 5m | 3m | 5m | 4.5m | 4m |
| Boom weight | 3kg | 4.5kg | 5kg | 6.5kg | 8kg | 9kg | 11kg | 7kg | 7.5kg |
Communication with customers
1. Motor works but there is no reaction on the arm.
a. Please check whether the clutch device is locked or not.
2. There is too much vibrant when the boom is rising or falling.
a. Please check whether the shock absorption rubber is broken or
not, if yes, change a new one.
b. Please check whether the balance spring is overused and
distorted. If yes, change a new one.
b. Please check whether the balance spring is overused and
distorted.If yes, change a new one, or spin
bottom adjust nut.
3. The boom could not rise up or fall down to the end.
a. When change a long boom to a short one, please readjust it.
b. The sensor does not plug well, please chek it.
c. The " Speed adjust switch" is wrong adjust, please readjust it.
4. The distance of the remote control decreases.
a. Check whether the charge capacity of the remote controller is
enough or not.
5. There is no reaction when pressing the remote controller
buttons.
a, Please check whether the power is supplied to the barrier gate
or not.
b. Please check whether the fuse is burnt out or not.
c. Please check whether the code both in the remote controller and
the control board are accordant or not.
6 There is no reaction on the motor when the user changes a control
board.
a. Please check the capacitance is correctly fixed or not.
b. Please check the sensor is right inserted or not.
Contact information:
Sue Zhang
Skype:SueZhang729
Whatsapp:+86 158 7925 9831
Email:sue@wonsunbarrier.com
