|
[China]
Trade Verify
Address: 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China
Contact name:Keira
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd |
|
Verified Suppliers
|
|
|
Car Access Control Barrier Arm Gate With Die casting Aluminum Alloy
Motor
Quick Detail:
Name: Parking barrier gate
1. Motor's power: 80W 24VDC
2. Max length of boom: 6m
3. Clutch key can be used when power is off
4. waterproof
5. Voltage:AC220V, AC110V
Model Selection and Differences
Model | Boom Shape | Max Boom Length | Speed |
WST1201 | Straight boom | 6m | 6 seconds |
WST1202 | Straight boom | 4.5m | 3 seconds |
WST12021 | 90 degree, Articulated boom | 5m | 6 seconds |
WST12022 | 90 degree, Articulated boom | 3m | 3 seconds |
WST12061 | 180 degree, Articulated boom | 5m | 6 seconds |
WST12062 | 180 degree, Articulated boom | 3m | 3 seconds |
Functions & Features
1) Manual release
2) Machine core with compression spring, effectively avoids the
accidents caused by spring breaking
3) Die-casting aluminum alloy motor, precision and good at thermal
radiating
4) Motor cooling fan, solving the problem of heat-protection
5) Double safety limit switches (photocell electrical limit
switch/motor memory sensor)
6) Reversing on obstacle
7) Auto-closing
8) Support the INFRARER PHTOCELL for anti-bumping function
(optional)
9) Support the external and internal VEHICLE LOOP DETECTOR
(optional)
10) Traffic light interface
11) Wire control (switch signal)/ Remote control (418MHZ)
12) RS485 communication module (optional)
Specifications
| Open/close time | 1, 1.8, 3, 6 sec. optional |
| Octagonal Arm | Max. 6mtr. ;45×100mm Aluminum alloy |
| Power Supply | AC 220V±10%,50/60HZ |
| AC Motor | 120W concreted decelerating torque motor |
| Controller | Intel 80C51 MCU, 40 MHz,controlled silicon motor control |
| Remote distance | >20mtr. |
| RS 485 interface (optional) | 9600bps, ASCII decimal encoded |
| Housing material | 2mm cold-roller sheet |
| Housing Painting | Automobile Painting, 5 years without rust,shedding and fading |
| IP level | IP 54 |
With WONSUN, your job gets easier.
Because we don’t just create “good” products, that work pretty
well.Our thinking is beyond the short-term.We are conceiving,
designing and creating high-tech solutions that are as advanced and
effective as they are reliable and long-lasting.
Because we want to provide tools and services that truly are
innovative,that will improve your performance and enhance your
skills;and that will make your business easier, increasing its
profitability.
Because our focus is on Quality with a capital Q.We just won’t
settle for less.
Communication with customers
1) Q: Connected power and press
open/close button but parking barrier gate no action?
A | Reason | Solution |
1 | Fuse blown | Check fuse and power in controller |
2 | Battery of remote control powered off | Change a new one |
3 | External protection circuit break or at protecting status | Open the barrier door and click OPEN/CLOSE button on control box |
4 | Same frequency interference | Check photocell and loop detector |
2) Q: Motor running but parking barrier gate
arm no action?
A | Reason | Solution |
1 | Barrier arm at 45° position where is hard to move | Unlock clutch and manually rotate arm to horizontal or vertical position then try again |
2 | Tension of balancing spring not suitable | Adjust spring exactly |
3 | Low working voltage | Check the voltage and power |
3) Q: When opening/closing, parking barrier gate
arm cannot reach right position (90° vertical & 180°
horizontal)?
A. | Reason | Solution |
1 | Length adjustment of connecting rod not correct | Open barrier door and unlock clutch to check when arm at 90° vertical position if the master rod covers slave one; when arm at 180° horizontal position if master rod and slave one are in the same straight line |
2 | Nuts on the limit switch loose | Tighten the nuts when arm at 90° vertical and 180° horizontal position |
