|
[China]
Trade Verify
Address: 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China
Contact name:Keira
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd |
|
Verified Suppliers
|
|
|
Solar Powered DC24V Security Traffic Barrier Gate For Toll Gate
System
If you have any question, please contact us freely!
Sales representatives: Keira
Whatsapp: +86 18507481610
Skype: zimin1314
Email: keira@wonsunbarrier.com
Wechat: Keira_Xia
Product outline:
The DZ-138 servo barrier gate series, which manufactured by our
company, adopts international advanced technology, mechanical and
electrical integrated design. Planet gear drive, high torque,
un-blocked, oil tight, no noise, automatically Self-locked when
power off, with 10 million operation times. The motor uses the DC
24V permanent magnet synchronous motor (PMSM motor), apply to the
global voltage, high-speed operation and rapid response, frequent
positive &negative operation in 24 hours does not heat, speed
time can be adjusted based on the vehicle flow and arm length, safe
and reliable. The series servo barrier gate is free-debugging and
free-maintenance, achieve the fully automation and intelligentize, and the barrier arm open/close is fast and smooth, easy to use
and safe.
DZ-138 barrier gate specifications:
| DZ-138 barrier gate | V06T | V09T |
| Max Boom Length and Diameter | 2500mm, Ф75mm | 3000mm, Ф75mm |
| Open/Close Time | 0.6sec | 0.9sec,2.5sec,4.5sec |
| Power Supply | 24/100/240VAC,50/60Hz | 24/100/240VAC,50/60Hz |
| Power Consumption | max.150W | 100w |
| Machine Case | Varnished 2.0mm steel plate | Varnished 2.0mm steel plate |
| Machine Case Size(W*D*H) | 342*312*959mm | 342*312*959mm |
| Net Weight | 43kg | 42.6kg |
| Operating Temperature Range℃ | -45℃~+85℃ | -45℃~+85℃ |
| Driving Method | Servo motor | Servo motor |
| Protection System(IP) | 54 | 54 |
| Insulation Class | F | F |
| Relative Humidity | ≤90% | ≤90% |
| Motor No-load Speed | 3000r/min | 3000r/min |
| Remote Control Distance | ≤100m (open, sunny weather) | ≤100m (open, sunny weather) |
| Output Torque | 1.2N.M*140=160N.M | 0.86N.M*140=120N.M |
| Running Noise＜ | 45dB | 45dB |
| Surface Treatment | Outdoor metal powder electrostatic spraying | Outdoor metal powder electrostatic spraying |
| DZ Controller | ||
| Voltage(±10%) | 100-240 volt | 100-240 volt |
| Frequency(Hz) | 50-60 | 50-60 |
| Max Power Consumption(watt) | 8 | 8 |
| Fuse | F5AH | F5AH |
| Control Voltage | 24V DC/max.3000mA | 24V DC/max.3000mA |
| Input-end Number | 8 | 8 |
| Open Collector Output Number | 2 | 2 |
| Zero Level Reversal Relay Number | 3 | 3 |
| Operating Temperature Range℃ | -45℃~+85℃ | -45℃~+85℃ |
| Protection System(IP) | 20 | 20 |
| Weight(gram) | 450gram | 450gram |
| Dimension | mm(L-W-H) | 158*126*55 |
Functions and Features:
| 1. Gate automatically open when power off, no clutch design, no
need human intervention. When power on, gate automatically reset, restore to the gate closing state, truly unattended, fire safety standards. If special requirement, manual operation is required when power off, operating arm open and close manually also can be realized by setting up control board DIP switch, which ensure that the system can be used at any time. 2. The use of Single Compression Balance Spring device, good regulation, no noise, indefatigable, not easy to break, safe and reliable. 3. A variety of input and output modes can be selected, normally open normally closed are optional. 4. Arm opening angle can be adjusted from 60 to 90 degrees, 10 degrees resolution, suitable for eaves prominent place to install. 5. Closing speed can be adjusted. 6. Barrier gate up &down signal relay switch output. 7. Barrier gate running state: OK signal output indicating that the gate is working properly. 8. Barrier gate operation abnormal alarm signal output. 9. R&G Traffic light relay switch signal output. 10. External loop detector signal anti-smashing interface, infrared sensor signal anti-smashing interface. 11. Count mode interface. 12. Arm Open priority anti-smashing function. No matter the current gate in what state, the operator through the triple push button, software or remote control to issue an open command, the gate will give priority to the implementation of the opening action. 13. Barrier with anti-collision protection function, when the vehicle hits the gate arm, arm can be swing out to avoid damage to the vehicle, and barrier gate machine. 14. Delay closed selection function. 15. High-sensitivity arm auto reverse function (intensity can be adjusted). 16. Parking system interface. 17.RS485 or RS232 network communication control up &down interface (no need to install communication module) 18. Anti-collision alarm signal interface. 19. Adjustable speed port (from 0.9s to 10 s) 20. High-strength precision cast steel, industry moving parts beyond the industry quality |
FAQ:
Q: Are you trading company or manufacturer ?
A: We are a professional barrier gate manufacturer.
Q: How long is your delivery time?
A: Generally it is 2-5 days if the goods are in stock. or it is 5-7
days if the goods are not in stock, it is according
to quantity.We can send it for you by DHL/Fedex/TNT/SEA/AIR or your
requirments.
Q: How about payment terms our company provide?
A: T/T or Western Union.
Q: Do you provide free samples ?
A:No,we don't provide free samples. The MOQ of our products is
1pcs.
Operating Safety:
A safety distance of at least 500 mm must be provided between the
end of barrier gates and the closest
physical obstructions (such as buildings, walls and fences, etc.).
The activities components of barrier gates
must be able to be seen directly by operators. When the boom is
moving, the personnel and other objects
are forbidden to stay near the barrier gate. If you have installed
the barrier and operating elements and are
connected to a fixed main power supply, you must use a main circuit
switch with full polarity insurance device.
It must be operated in accordance with this installation manual,
and must be approved by the company before
making any changes. The fixing device of the boom is designed to
bear winds of magnitude 10 (= 500N / ㎡.).
If it’s expected that there will be a higher speed wind, must be
approved by the company before change the
fixing device of boom. A boom length more than 3.5meter will be
required to install a swing support or a
support column. All of the circuit connections, wiring work and
replacement of any circuit components must
be carried out by professionally trained electricians. Please
firstly cutting off the connections with main power
supply before opening barrier gates. It is forbidden to make
technical modification or changes to the barrier system.
After cutting off the power, please starting after at least 10
seconds.
Solar Powered DC24V Security Traffic Barrier Gate For Toll Gate
System
Solar Powered DC24V Security Traffic Barrier Gate For Toll Gate
System
Solar Powered DC24V Security Traffic Barrier Gate For Toll Gate
System
