Guangzhou Weixing Automobile Fitting Co.,Ltd. |
Verified Suppliers
|
|
Compressor Air Condition VS16 LR083480 For RangeRover Evoque For Discovery Sport 2.0T WXLR005
The AC compressor is responsible for reducing the volume of the
refrigerant gas, compressing it in order to complete the
refrigerant cycle in the system. It can be thought of as the
component that does all the heavy lifting. In order to perform this
task, it requires energy, which it obtains from the engine through
a pulley and shaft.
Parameter:
Car model | |
Compressor Model | |
Grooves | |
Voltage | |
Refrigerant | |
Year Model | |
OE NO | |
Test car air conditioning compressor
To test a car air conditioning compressor, start by visually
inspecting it for any signs of damage or leakage. Then, use a
multimeter to measure the voltage at the compressor's electrical
connector to ensure it is receiving power. Next, check the clutch
engagement by turning on the air conditioning and observing if the
compressor clutch engages and spins freely. Use a manifold gauge
set to check the high and low side pressures, comparing the
readings to the manufacturer's specifications to determine if the
compressor is functioning properly. If all other tests indicate a
fault with the compressor, it may need to be taken to a qualified
professional for further testing and repair.
When it comes to installing a car air conditioning compressor,
follow these steps:
1. Use a refrigerant recovery machine to remove the refrigerant
from the system.
2. Disconnect the electrical connector and remove any mounting
brackets or bolts securing the compressor to the engine.
3. Remove the drive belt and any other components blocking access
to the compressor.
4. Install the new compressor, ensuring the fittings are aligned
correctly and replacing any gaskets or seals.
5. Reinstall the mounting brackets, bolts, and electrical
connector.
6. Put back any components that were removed to reach the
compressor.
7. Evacuate and recharge the system with the appropriate amount of
refrigerant, following the manufacturer's guidelines.
8. Test the system to ensure the compressor is functioning properly
and there are no leaks.
Please note that it is recommended to consult the vehicle's service
manual or seek professional assistance for specific instructions on
testing and installing a car air conditioning compressor.
A/C Compressors for Cars
The A/C compressor is the driving element of the cold A/C loop and
is also the most technically complex component.
There are Three main car compressor technologies:
1.Piston-Type Compressors
The piston type is the most common. This type contains swash plate
technology and wobble plate technology.
2.Rotary-Type Compressors
Rotary-type compressors main axis of the rotor coincides with the
center.
>3. >Scroll-Type Compressors
Scroll-Type Compressors dislocation creates pressure to achieve
high-speed rotation.
Goods Prictures
Delivery/Warehouse