Electrical Heating Vacuum Emulsifying Mixer For Daily Chemical And Cosmetics

Electrical Heating Vacuum Emulsifying Mixer For Daily Chemical And Cosmetics
 
Vacuum Emulsifying Mixer description
 
The materials are heated and mixed in water tank and oil tank to be fully reacted. Sucked into emulsifying tank by vacuum pump, the materials are stirred by both the center blade and side scraper, which works on the wall. In the process of blade-stirring, the materials are continuously crushed, pressed, folded. Then, the materials are sent to the cut-off mixing until where they are finally crushed into small pellets. Besides, because of the vacuum in emulsifying pot, the bubbles generated during stirring and mixing process are sucked out from material lotion making machine.
 
(Vacuum ointment emulsifying machine, vacuum homogenizing emulsification machine, vacuum emulsify, vacuum emulsifier, emulsifier, vacuum emulsifying mixer) 
 
Vacuum Emulsifying Mixer Applications
 
Daily chemical and cosmetics industry:
Baby cream, shaving cream, hand cream, toothpaste, skin-whitening cream, sunscreen cream, face cleanser, moisture cream, detergent, shampoo, lotion, hair conditioner etc.
 
1. Upper cover lifting system
The lifting of upper cover is fulfilled by a series of hydraulic devices. The device is fitted with a safe limit system, which can keep the upper cover stopping at any expected position.
2. Tilting system of container
Tilting system of container used for discharge is accomplished by a series of mechanical devices and stops at any angle. 
3. we also use electrical Heating for 100L vacuum emulsifying mixer, it is better for use. 
4. we also can provide double safety control for customer, it is more safety for operator to using this machine. 
· Capacity:100L
· Material: material contact part SS316L, material non-contact part SS304.
· Customized service: to provide and design total solution as per customer URS
Vacuum Emulsifying Machine including:
· Vacuum emulsifying main machine
· Pre-mixing tank for water and oil material
· Vacuum system
· Hydraulic system
· Control system
· Platform made from SS304
Vacuum emulsifying main machine:
· Slow mixer 0-40rpm with PTFE scraper
· Homogenizer 0-3500rpm (rotor and stator can adjust space)
· Heating by steam or electricity
· Pressure: chamber-0.09Mpa to 0.1Mpa, jacket 0.3Mpa for steam (standard type)
· Upper cover lifting by hydraulic
· Safety limit switch for safety operation
 · Upper cover connection: Liquid feed inlet with stainless steel pipe filter, solid material inlet, v acuum inlet, compressed air inlet, breaking vacuum inlet, sight glass, CIP cleaning head, discharging port, dustproof respirator.
Water and oil pre-mixing tank
· High shear mixer 960rpm or slow mixer 60rpm
· Heating by steam or electricity
· Pipeline for material transfer to main emulsifying machine
Vacuum system:
· Water ring type vacuum pump or oil type vacuum pump
· Safety valve for protecting the Water ring type vacuum pump
After finish one batch, customer can choose positive pressure or rotor pump for material out.