Changzhou Welldone Machinery Technology Co.,Ltd |
Verified Suppliers
|
|
♦ There are many kinds feeding equipment for choosing, and feeding
is continue and static.
♦ At the bottom of drier, where is high temperature area, heat
sensitivity raw material cannot contact with heat surface directly,
therefore it solves the carbonized and changed color problems of
heat sensitivity raw material.
♦ There are air pressure equipment and shaft equipment, so can
longer life of machine.
♦ There is special equipment for sharing wind, and raising the
amount of hot air.
♦ There are rotational flow pieces inside the drying chamber. It is
used to control the moisture and granule of raw material to needed
level.
♦ The density will be added in the machine.
♦ Because gas speed at circle inside the drying chamber is high and
the staying time of raw material is short, high efficiency and
quick speed can be realized. It is possible for small equipment to
carry out large-scale production.
♦ Hot air enters into stirring and crushing and drying chamber from the bottom of drier with suitable atomizing speed .It exerts strong shearing, blowing, floating and rotating effect to raw material. Therefore raw material is granulated through centrifuge, shearing, impacting and friction effect. It strengthens the process of heat exchange. At the bottom of drier, the large and damp granule is crushed under the action of stirrer and the granule that is small in partial and contain less moisture will lift accompanied with revolving air stream. During the period of lift, it is dried further. Because gas and solid two phases flow in rotating and the inertia of solid phases is more than that of gas and the relative velocity between solid and gas phase is large, so it strengthens the process of heat exchange. Therefore the machine has strong drying capacity.
Technical Parameters of Energy Saving Environmental Friendly Food Drying Spin Flash Air
Dryer Machine
Picture of Energy Saving Environmental Friendly Food Drying Spin Flash Air
Dryer Machine