Sino-NSH Oil Purifier Manufacture Co., Ltd |
Verified Suppliers
|
|
1800L / H Turbine Oil Purifier Machine 27KW Vacuum Filtration Plant Centrifuging System
Application
TF series is particularly suitable for purifying turbine lubricating oil. It also applys to treat hydraulic, coolant oil and other lubrication in which contain large of water, vapor, impurities, sludge, dielectric and colloid.
It can eliminate them effectively and efficiently. TF series will result in the improvement of the properties of turbine oil, other lubrication and extend the maintenance period of turbine or other equipment which has lubrication system and keep them operate in good condition.
Description
TF turbine oil purifier series is developed by vacuum evaporation technology, coacervation technology, coalescing technology, separating engineering technology and refined purification technology. It can eliminate water, gas, impurities, colloid, dielectric etc. rapidly and effectively in high vacuum situation and make the waste oil reuse.
The lubrication of turbine or other equipments which has lubrication system need be replaced frequently because of vapor, water and other impurities mixed with it. Otherwise, oil deterioration would result in breakdown of machinery or affect the normal running of machinery.
TF series can effectively extend the lifetime of oil and protect turbine and other machinery which has lubrication system from damage.
Features
1. Three-stage gradually dense filter system, imported filter material (HPM) filter element, high precision, long life, repeated use without replacing completely filter impurities in the oil. The filter element has the characteristics of high filtration accuracy, large scale capacity, small resistance and long service life, etc., which constitute a reliable solid pollutant filtering system to ensure the cleanliness of oil and meet the operating standards of steam turbine oil in the power industry (users can operate in 1, 3, 5, 10/> 10μm multi-specification filter element a stainless steel filter element with less than or more than three groups of filter element combination). No plate and frame type oil filter needs frequent replacement of filter paper, and there will be no waste of turbine oil in use.
2. Water demulsification system, using polymer and polymer
material, can quickly demulsification, separation of normal water
in oil, make dehydration more thorough, higher efficiency; special
coalescing separation filter element can be used to achieve more
efficient water removal rate for the unit with serious water
inflow.
3. The combination of aggregation separation and three-dimensional
complex flash evaporation can quickly and thoroughly remove water
and gas in oil.
4. Low temperature oil treatment technology can completely remove
the water in the oil to ensure that the oil pressure value is up to
standard.
5. The backwash system is set for fast backwash of easily blocked
filter element to ensure normal and continuous purification and
avoid manual disassembly and cleaning.
6. Using the infrared automatic controller developed by the
company, the equipment can control the solenoid valve to
automatically enter oil, oil pump to automatically discharge oil,
so that the oil level in the vacuum tank is automatically in a
relative balance state.
7. Through the detection and analysis of the liquid level signal by
the infrared level controller, the interlock control of the heating
device can prevent dry burning caused by any reason.
8. The balanced heating system ensures that the oil is heated
evenly and the heating rate is fast, without causing local
carbonization of the oil.
9. Fuzzy regional heating control can automatically control heating
system operation according to the set temperature, heating critical
point without turbulence, heating more stable, more balanced.
10. Digital display intelligent temperature controller, can set the
upper and lower limits of heating temperature, stable control, more
intuitive temperature display. The temperature probe directly
detects the oil temperature, which is sensitive and accurate
without hysteresis.
11. Group control heating or multi-step heating and independent
control of multi-temperature controller are adopted for the
equipment with large heating power. Group heating can be selective
input according to the actual situation of the site; multistage
cascade heating can automatically control the heating power input
according to the setting and timely oil temperature. Not only can
the full power rapid heating when the oil temperature is low, but
also can automatically keep the oil temperature at low power when
the oil temperature reaches the preset temperature, so that the
equipment is more energy saving, while avoiding the oil temperature
overheating and carbonization.
12. Built-in circulation system, can carry out circulation
purification inside the equipment, after passing the equipment.
13. The machine is equipped with overpressure, overcurrent,
overload and dry burning protection measures, can be online
unattended operation.
Edges
Structure and Appearance
Working Principle
When the oil purification machine starts, contaminated oil enters into the primary filter under the effect of pressure difference, in which large particles of particulate matters are filtered off. Therefrom the oil is heated and goes into the secondary filter, in which fine particles of matters are removed. Then the oil goes into the water separator, the free, soluble water is separated from the oil and drained to the water collector. After that, oil passes through the fine filter and fine particles of matters is removed during the process. Finally oil goes into the vacuum tank, where residual trace of water is removed and steam is condensed in the condenser or expelled out by the vacuum system. The reused oil is drained by oil pump in the end.
Guarantees & documentation
SINO-NSH Warrants the plant supplied under this specification against defects in material and workmanship under normal use and service for a period of sixteen (16) months from date of shipment or twelve (12) months after the start up of the system. SINO-NSH’s obligation under this warranty is limited to repairing or furnishing, without charge F.O.B. point of manufacture, a similar part to replace any part, which was proven to be defective within warranty period. SINO-NSH shall not in any event be held responsible for any indirect or consequential damages. The performance guarantee will be within limitations as detailed in duty & performance paragraph of this specification.
Two(2) copies of operating & maintenance manuals are supplied with each purifier. These systems are designed to operate with the utmost simplicity and is required, please contact SINO-NSH for additional charges.
Technical specifications
Item | Unit | TF-30 | TF-50 | TF-100 | TF-150 | TF-200 | |
Flow Rate | L/H | 1800 | 3000 | 6000 | 9000 | 12000 | |
Vacuum Range | MPa | -0.06~~-0.096 | |||||
Working Pressure | MPa | ≤0.3 | |||||
Water Ratio | PPm | ≤ 100 | |||||
Impurity size | µm | ≤ 5 | |||||
Clearness | NAS(1638) | ≤ 6 | |||||
Temperature Range | ℃ | 40—80 | |||||
Demulsifying Value | Μin | < 15 | |||||
Power Supply | V | ~50Hz 380V(or as needed) | |||||
Working Noise | dB | ≤ 70 | ≤ 75 | ||||
Heating Power | Kw | 30 | 36 | 72 | 90 | 120 | |
Total Power | Kw | 33 | 39 | 77 | 98 | 128 | |
Inlet(Outlet)Diameter | Mm | DN25 | DN32 | DN40 | DN50 | DN65 | |
Net Weight | Kg | 420 | 550 | 750 | 850 | 950 | |
Size | length | Mm | 1400 | 1550 | 1700 | 1800 | 1900 |
width | Mm | 1050 | 1100 | 1300 | 1400 | 1500 | |
height | Mm | 1650 | 1700 | 1850 | 1950 | 2050 |
Another types of our oil purifier machines
TF series oil purifier: Turbine oil purifier system is particularly suitable for
purifying turbine lubricating oil. It also applys to treat
hydraulic, coolant oil and other lubrication in which contain large
of water, vapor, impurities, sludge, dielectric and colloid. It can
eliminate them effectively and efficiently.
LV series oil purifier: Lubrication Oil Filter System are suitable especially for
purifying and restoring hydraulic oil, machine oil, coolant oil and
various other lubrication oil.
GER series oil purifier: Used oil regeneration system is suitable to regenerate used
internal-combustion engine oil including diesel engine oil,
gasoline engine oil, and used hydraulic oil, other used lubrication
oil of machinery.
GED series oil purifier: it is used to recycle all kinds of waste oil into base oil or diesel oil with high quality.
About us:►We are the leading manufacture near 25 years experience and supply
best quality and highest cost performance oil purification
machines. Our oil purifier equipment are built by high quality raw
materials with newest advanced technology by many skilled
technicians and professional workers. We are honest to every
customer and responsible for every machine we sold, we offer great
after sales service, anytime when customer need us, no matter
before or after purchase, we are available online or calling, to
make a fast and instant response to customer.
►we practiced in this industry during all these years, and have
rich on-site experiences too. Any on-site cases, please contact us
for a solution.
►For detailed product specifications, please leave us your email or
mobile no. To send you the catalog. Thank you!
Contact:
Shirley Liu
Email: sinonsh33@sino-purification.com
Tel/Whatsapp: +8617726298694