|
[China]
Trade Verify
Address: A04 10 B Blocks of Shenzhen Bay Science and Technology Eco-Park SHENZHEN,Guandong,CHINA 518052
Contact name:Cherry liu
TaiMi(Shenzhen) electronics technology Co.,ltd |
|
Verified Suppliers
|
|
|
1 Year Warranty 252*92*67mm Dry Fog 10 Heads Mist Maker Ultrasonic diffuser Ultrasonic Atomizing Transducer
Brief Introduction of Ultrasonic Mist Maker Fogger |
The use of: For humidifying machine, fog equipment movement, or directly used as a humidifier (to be connected to 48V DC). Use matters needing attention:
1 when the atomizer is working correctly, please don't put their hands on the above atomizer spray chamber, to prevent ultrasonic injury.
2. The atomizer must be in the water to work properly, before use, please the into the water and then connect the power, and to ensure that the fogging piece surface in the water, so as not to damage the atomizer.
3. when to stop using the atomizer before you disconnect the power supply, and then removed from the water atomizer.
4. use the atomizer, please use the output power is more than 250W, the output voltage is DC45 + 5V power supply.
5. when a plurality of atomizers set in the same container when in use, respectively is equipped with a separate power supply, not with a single power supply connection multiple atomizers use, and pay attention to the shell of the atomizer communicated each other, to thereby generate electrical corrosion.
6. Atomizer fog must use fan forced discharge, planar space and each nebulizer retained 350CM2, so as to avoid water temperature too high shorten the lifespan of the atomizer.
7.The atomizer is not suitable for the atomization of corrosive liquid, so as to avoid damage to the metal shell and atomizer atomizing sheet.
8. the installation process please don't damage the water level sensing switch, water level switch to avoid failures caused by uncontrolled atomizer.
The water level switch is damaged should be stopped, otherwise there will be a piece of dry burning so as to further damage the atomizing atomizer. At this time need to be repaired by professional maintenance personnel to use. Product warranty:
1 the product warranty period is one year. Normal use within a year if the failure can be returned to the original factory warranty, non normal use of the failure, can be carried out with a taste warranty, depending on the circumstances.
2 the following circumstances, does not belong to the scope of our quality assurance. According to the contents of the store - installation use and maintenance of the fault. The product is without dismantling repair, modification or additional parts. The loss (such as atomization etc.) is not within the scope of warranty.
| Main Features of Ultrasonic Mist Maker Fogger |
1. Super high mist volume (Mist volume 4.5Kg/H)
2. Super fine mist particle size (φ20 1.7MHZ piezoceramics disc)
3. High consistency (Mist output tolerance ±10%)
4. Long life (8000H Mist attenuation ≤ 30%)
5. Corrosion resistant (6um Ni-Cr coating )
6. Waterproof design (high density sealing )
7. High reliable water level sensor (Patent spherical CapSense)
8. Built-in Thermal protection( Temperature>65℃ automatic shut
down)
9. Voltage delay circuit (start delay 5 seconds to prevent electric
shock)
10. Anti-fault Design of wiring (convenient installation and
maintenance)
11. LED failure protection (LED external silicone lamp cover,
prevent erosion and water seepage)
| Advantages of our Ultrasonic Mist Maker Fogger |
| ♥ The stronger adaptability of atomized water quality, using pure water or tap water can work normally. |
| ♥ Transformer scope is wide, guarantee it can still normal use even if the voltage of power supply has big change. |
| ♥ Equipped with transformer polarity protection circuit,which can prevent damage atomizer when we connect the wrong the negative and positive.(if we connect the wrong negative and positive, it will not work ) |
| ♥ Start delay circuit, to avoid damage to the circuit because of big current when we let them work. |
| ♥ A single nozzle line using the independent design,and adopt the over-current protection circuit, so if there is any one of nozzle which was damaged,which will not affect the other nozzle. |
♥ The machine current affected by voltage and temperature is less, because of current of each nozzle adopt electronic automatic adjustment, then working voltage and temperature will have less effect for the total working current. The working current will reduce with temperature increasing.but it does not affect the mist amount It is to avoid the power tube which is too hot,and current increase. Then damage to ultrasonic atomizer. |
| ♥ Adopts the high thermal conductivity, corrosion resistant ability, good mechanical strength of the metal shell, reducing temperature difference between ultrasonic atomizer interna and water. then prolong the service life of the product. |
| ♥ Low temperature and big atomizing quantity design |
| ♥Shell adopts stainless steel |
| The Specification of Ultrasonic Mist Maker Fogger |
| 4500ml Ultrasonic Mist Maker Parameters | |
| Main Body Material | Stainless steel |
| Rated Voltage | DC 36V-48V |
| Power | 250W |
| Ceramic Disc Dia | 20mm |
| Disc Quantity | 10 |
| Working Water Level | 65mm |
| Product Size | 252*92*67mm |
| Mist Volume | 4500ml/H |
| Working Temperature | 1-55° |
| Cable | 1.5m |
| Mist Output Decay Rate | 5000jr<30% |
| Storage Water Protection | Capacitor Induction Mode |
| Ultrasonic Atomizing Transducer Contact Us |
| Ultrasonic Atomizing Transducer Principle |
The principle of ultrasonic atomization is the use of electronic over-frequency oscillation (the oscillation frequency is 1.7MHz, which exceeds the hearing range of humans and has no harm to humans and animals). The high-frequency resonance of the atomization sheet throws the water away from the surface of the water and produces a natural flow. Water mist, no heating or chemicals required. In the process of atomization, a large amount of negative ions will be released, combined with the floating smoke and dust in the air, and the electrostatic treatment will precipitate and filter it, which can effectively remove harmful substances and odors such as nails, carbon monoxide, bacteria, etc., and can prevent and control decoration pollution. The high concentration of negative ions can effectively kill harmful bacteria and viruses suspended in the air, purify the air, and reduce the occurrence of diseases. In the process of atomization, the negative ion particles can compensate for the air humidity and improve the dry home environment or industrial environment.
| Some Application of Ultrasonic Mist Maker Fogger |
If you are interested in our product,
Pls just feel free to send us your inquiry.
We wil try our best to quote the competitive price for you!
Ultrasonic atomizer Related finished module Products:
Our Services
Ultrasonic atomizer Packaging & Shipping
More of ours :ultrasonic atomier Workshop
Ultrasonic Atomizer Transducer FAQ
| 1. Q: When can we get the reply? |
| Any inquiries will be replied within 24 hours. |
| 2. Q: Can i have samples? |
| A: Yes. Sample is surely ok. We can even send you free sample and you should only pay for the freight fee. |
| 3. Q: What about minimum order quantity? |
| A: We have no limit for MOQ, so you can even buy only 1 piece. Welcome to buy sample to test first. |
| 4. Q: What about delivery time? |
| A: We will send sample to you within 3 days. |
| Production for big quantity needs 20 to 25 days. And it also depends on product and quantity. |
| 5. Q: What about terms of payment? |
| A: Payment terms: T/T, west Union, Paypal and L/C etc. |
| 6. Q: How you will send the goods to us? |
| A: We will send the goods to you by Air (DHL, Fedex, UPS, TNT) and Sea shipping etc. |
| 7. Q: Are you trading company or manufacturer ? |
| A: We are in China buzzer manufactory |
| 8. Q: Do you support OEM and ODM services? |
| A: Yes, surely support. we can customize products according to the drawing. |
| 9. Q: Can you provide driven circuit? |
| A: Yes, of course sure. |
| 10. Q: Can you solve technical problems for us? |
| A: Yes, Our Technical team will try our best to support you. |
