|
[China]
Trade Verify
Address: A04 10 B Blocks of Shenzhen Bay Science and Technology Eco-Park SHENZHEN,Guandong,CHINA 518052
Contact name:Cherry liu
TaiMi(Shenzhen) electronics technology Co.,ltd |
|
Verified Suppliers
|
|
|
DC 48V New Ultrasonic Atomizer Industrial Humidifier Fog Machine Parts 5Kg/H Ultrasonic Mist Maker Fogger
Brief Introduction of Ultrasonic Mist Maker Fogger |
Brief Introduction of 5000ml 250W Have Led Mist Maker Ultrasonic Mist Maker Humidifier
Mist Maker Ultrasonic Mist Maker Humidifier use electronic overclocking shock (shock frequency of 1.7mhz, more than the scope of huming hearing,no harm to the human body and animals ), through the atomization of high-ferquency resonant , the water from the surface and produce natural and elegant water mist , without heating or chemical agents . Water mist contains a lot of air anion and moisture , can increase the air humidity and fresh air , breathe the freshness of nature , moist air .
| Main Features of Ultrasonic Mist Maker Fogger |
1. The integrated atomization module is used internally, and the
chip can be replaced, and the maintenance is simple;
2. The diameter of the mist particles sprayed by the whole machine
is less than 10uF;
3. The maximum relative humidity can reach 99%, adjustable and
controllable, with temperature display;
4. Intelligent and accurate humidity control, using world-class
probes, the control accuracy is more than 3%
5. Flexible movement, easy installation, both mobile use and
external wall hanging installation;
| Advantages of our Ultrasonic Mist Maker Fogger |
| ♥ The stronger adaptability of atomized water quality, using pure water or tap water can work normally. |
| ♥ Transformer scope is wide, guarantee it can still normal use even if the voltage of power supply has big change. |
| ♥ Equipped with transformer polarity protection circuit,which can prevent damage atomizer when we connect the wrong the negative and positive.(if we connect the wrong negative and positive, it will not work ) |
| ♥ Start delay circuit, to avoid damage to the circuit because of big current when we let them work. |
| ♥ A single nozzle line using the independent design,and adopt the over-current protection circuit, so if there is any one of nozzle which was damaged,which will not affect the other nozzle. |
♥ The machine current affected by voltage and temperature is less, because of current of each nozzle adopt electronic automatic adjustment, then working voltage and temperature will have less effect for the total working current. The working current will reduce with temperature increasing.but it does not affect the mist amount It is to avoid the power tube which is too hot,and current increase. Then damage to ultrasonic atomizer. |
| ♥ Adopts the high thermal conductivity, corrosion resistant ability, good mechanical strength of the metal shell, reducing temperature difference between ultrasonic atomizer interna and water. then prolong the service life of the product. |
| ♥ Low temperature and big atomizing quantity design |
| ♥Shell adopts stainless steel |
| The Specification of Ultrasonic Mist Maker Fogger |
| Type | TM5000 | Power Supply | 100-120v. 220-240v |
| Atomizing Quantity | Above 5000ML | Working Voltage | DC 48V |
| Size | 253*92*67MM | Power | 250w |
| Working Frequency | 1.7MHZ | LED | 1pcs |
| Working Temperature | 1-45 ℃ | Diameter of piezoceramics | 20mm |
| Over-temperature Protect | 55℃ | Cable | 1.4m |
| Water Level | 70-90MM | Material | Stainless Steel |
| Ultrasonic Atomizing Transducer Principle |
The principle of ultrasonic atomization is the use of electronic over-frequency oscillation (the oscillation frequency is 1.7MHz, which exceeds the hearing range of humans and has no harm to humans and animals). The high-frequency resonance of the atomization sheet throws the water away from the surface of the water and produces a natural flow. Water mist, no heating or chemicals required. In the process of atomization, a large amount of negative ions will be released, combined with the floating smoke and dust in the air, and the electrostatic treatment will precipitate and filter it, which can effectively remove harmful substances and odors such as nails, carbon monoxide, bacteria, etc., and can prevent and control decoration pollution. The high concentration of negative ions can effectively kill harmful bacteria and viruses suspended in the air, purify the air, and reduce the occurrence of diseases. In the process of atomization, the negative ion particles can compensate for the air humidity and improve the dry home environment or industrial environment.
| Some Application of Ultrasonic Mist Maker Fogger |
textile industry, electronics industry, printing industry, spraying
industry, tobacco industry, edible fungus, computer room,
supermarket preservation, laboratory, automotive industry, food
industry, planting industry, breeding industry, artificial
landscape, health care, air conditioning Industry, plastic
industry, etc. In general, it is used for the following equipment:
Humidifier for textile mills: high-pressure micro-mist
humidification cooling and dust removal system
Humidifier for electronics factory: wet film humidifier, dry steam
humidifier, humidifier for central air conditioning, electrode
humidifier, electric humidifier
Humidifiers for printing plants: industrial ultrasonic humidifiers,
high-pressure micro-mist humidifiers, economical wet film
humidifiers
Special humidifier for spraying industry: Industrial ultrasonic
humidifier
Tobacco industry special humidifier: Industrial ultrasonic
humidifier, high pressure micro mist humidification and dust
removal system, industrial ultrasonic humidifier, dry steam
humidifier
Humidifier for cold storage and air-conditioning warehouse:
industrial ultrasonic humidifier, high-pressure micro-mist
humidification system
Special humidifier for machine room: industrial ultrasonic
humidifier, economical wet film humidifier, electrode humidifier,
electric humidifier
Special humidifier for supermarket preservation: industrial
ultrasonic humidifier
Laboratory humidifier: industrial ultrasonic humidifier, electrode
humidifier, electric humidifier
Industrial ultrasonic humidifier
Ultrasonic humidifier for cold storage and air conditioning storage
Industrial ultrasonic humidifier, high pressure micro mist
humidifier, special ultrasonic humidifier for cold storage air
conditioning
Industrial ultrasonic humidifier, high pressure micro mist
humidification, cooling system
Industrial ultrasonic humidifier, high pressure micro mist
humidification, dust removal system
Industrial ultrasonic humidifier, high pressure micro mist
humidification system
Ultrasonic humidifier for central air conditioning, electrode
humidifier, electric humidifier, dry steam humidifier, fan coil
humidifier,
Industrial ultrasonic humidifier
Used in humidifier, incense burner, beauty machine, disinfection
machine, bathtub fog machine, bonsai, crafts, etc.
| Ultrasonic Atomizing Transducer Contact Us |
If you are interested in our product,
Pls just feel free to send us your inquiry.
We wil try our best to quote the competitive price for you!
Ultrasonic atomizer Related finished module Products:
Our Services
Ultrasonic atomizer Packaging & Shipping
More of ours :ultrasonic atomier Workshop
Ultrasonic Atomizer Transducer FAQ
| 1. Q: When can we get the reply? |
| Any inquiries will be replied within 24 hours. |
| 2. Q: Can i have samples? |
| A: Yes. Sample is surely ok. We can even send you free sample and you should only pay for the freight fee. |
| 3. Q: What about minimum order quantity? |
| A: We have no limit for MOQ, so you can even buy only 1 piece. Welcome to buy sample to test first. |
| 4. Q: What about delivery time? |
| A: We will send sample to you within 3 days. |
| Production for big quantity needs 20 to 25 days. And it also depends on product and quantity. |
| 5. Q: What about terms of payment? |
| A: Payment terms: T/T, west Union, Paypal and L/C etc. |
| 6. Q: How you will send the goods to us? |
| A: We will send the goods to you by Air (DHL, Fedex, UPS, TNT) and Sea shipping etc. |
| 7. Q: Are you trading company or manufacturer ? |
| A: We are in China buzzer manufactory |
| 8. Q: Do you support OEM and ODM services? |
| A: Yes, surely support. we can customize products according to the drawing. |
| 9. Q: Can you provide driven circuit? |
| A: Yes, of course sure. |
| 10. Q: Can you solve technical problems for us? |
| A: Yes, Our Technical team will try our best to support you. |
