4~20bar Abrasion Resistance core o ring flush ceramic capacitive
ceramic pressure sensor transmitter
Product description
Ceramic capacitance pressure sensor material selection of 96%
ceramic, has strong corrosion resistance, impact resistance, high
elasticity and other excellent characteristics, while the extremely
high thermal stability of the ceramic makes its operating
temperature range of-40℃ ~135℃.In the working process of the
ceramic capacitance pressure sensor, it does not need to transfer
the pressure through other media. The monitoring pressure acts
directly on the ceramic diaphragm, and the electric capacity change
between the base electrode and the diaphragm electrode is
proportional to the pressure.When overload, the diaphragm reaches
against the base without breaking. When the pressure recovers, its
performance will not be affected, which completely solves the
disadvantages of low-range overload failure. It is the replacement
product of ceramic pressure resistance and diffusion silicon
pressure sensor.
corrosion resistance, impact resistance, high stability, high
temperature resistance and no la
⚫ operating pressure range: 0.5MPa ~ 4.5MPa
⚫ optional range 0.5/1/2/3.5/4.5MPa
⚫ operating temperature: -40℃ ~ 135℃
⚫ power supply voltage: 5 ±, 5%, V d c
⚫ is linear / repetitive: <1.0%VFS
⚫ temperature drift: <0.025% / VFS /℃
⚫ working medium: air, engine oil, brake oil, gasoline, diesel oil,
airconditioning refrigerant, etc
⚫ car motor oil sensor
⚫ car brake system
⚫ car air conditioning system
⚫ new energy vehicle thermal management system
⚫ car inlet and exhaust system
⚫ screw air compressor, frequency conversion water pump system (water
impact tolerance value, to do insulation)
⚫ Smart pressure cooker
⚫ commercial frequency conversion a
Name: NTY21100
Y: circular type,
F: Square type 21:
diameter 21mm
100: Pressure range of 100bar
1. Notes before use
Ceramic capacitance pressure sensors may be damaged beyond the
service conditions described in this specification, such as harsh
working environment or overpressure, and must follow the
instructions of this specification when used.
2. Welding precautions
Ceramic capacitance pressure sensor is a combination of ceramic and
metal.The thermoplasticity of the ceramic body itself is poor, and
the response to the heat is relatively fast. Under the condition of
urgent cold and urgent heat, the ceramic body is easy to crack or
virtual welding.Recommended welding conditions: when manual
welding, the maximum power of constant temperature dering iron is
25W, welding temperature 280~320℃, welding time 3S, welding times
less than or equal to 3 times.The ons shall be welded on a 120
degree heating table.
3. Storage method
To maintain the weltability of the pins and ensure the packaging
material in good condition, the recommended storage conditions are
as follows: storage temperature: 5~40℃; storage relative humidity:
below 70%RH. Ceramic capacitance pressure sensor soldability
decreases over time, even under ideal storage conditions, and
therefore should be used within half a year from the date of
delivery.
Piezoresistive Ceramic pressure sensorProduct Features
● High accuracy and high stability
● Wide choice of measuring ranges
● Solid ceramic sensitive diaphragm
● Smart volume, easy for encapsulation
● Excellent shock and vibration resistance
● Excellent corrosion and abrasion resistance
● Low cost, extreme extensive application range
● Thermally compensated, wide-range operating temperature
Piezoresistive Ceramic pressure sensorApplication
REMARK:We also can supply this finsihed pressure sensor
products.Fell free to connect us:
Email:cherryliu@taimihk.com
Mobile/whatsApp:+86 13538467125
FAQ
1. Q: When can we get the reply? |
Any inquiries will be replied within 24 hours. |
2. Q: Can i have samples? |
A: Yes. Sample is surely ok. We can even send you free sample and
you should only pay for the freight fee. |
3. Q: What about minimum order quantity? |
A: We have no limit for MOQ, so you can even buy only 1 piece.
Welcome to buy sample to test first. |
4. Q: What about delivery time? |
A: We will send sample to you within 3 days. |
Production for big quantity needs 20 to 25 days. And it also
depends on product and quantity. |
5. Q: What about terms of payment? |
A: Payment terms: T/T, west Union, Paypal and L/C etc. |
6. Q: How you will send the goods to us? |
A: We will send the goods to you by Air (DHL, Fedex, UPS, TNT) and
Sea shipping etc. |
7. Q: Are you trading company or manufacturer ? |
A: We are in China buzzer manufactory |
8. Q: Do you support OEM and ODM services? |
A: Yes, surely support. we can customize products according to the
drawing. |
9. Q: Can you provide driven circuit? |
A: Yes, of course sure. |
10. Q: Can you solve technical problems for us? |
A: Yes, Our Technical team will try our best to support you. |