|
[China]
Trade Verify
Address: No. 799, Middle Jiasong Road, Qingpu District, Shanghai, China.
Contact name:Aaron.Zhang
Upass Material Technology (Shanghai) Co.,Ltd. |
|
Verified Suppliers
|
|
|
UV Curing PP Silicone Coated Release Liner For Waterproof Membrane Silicon type: Solvent Silicon
PP release liner is a pleastic release film which made of Polypropylene film(Also called PP) as carrier, silicon coated on either one or two-sided releases options. Use UV curing type for silicon coated, which made high subsequent adhesion, can make sure the adhesion of customers's self-adhesion products.
|
Parameter:
| Products Name | UV Curing PP Silicone Coated Release Liner For Waterproof Membrane | Spec. | 0.05mm*1040 | ||
| Detection Methed | Q/TPXP 1-2013 | Date | 2021.3.3 | ||
| NO. | Item | Factory Requirement | Detection Value | Individual Determination | |
| 1 | Appearance | No bubbles, no stains, no damage, no impurities | Qualified | Qualified | |
| 2 | Spec. | Width | 1040±10mm | 1041 | Qualified |
| Thickness | 0.05±0.005mm | 0.051 | Qualified | ||
| 3 | Max.F (N/50mm) | TD (CD) | ≥30 | 58 | Qualified |
| MD | ≥30 | 92 | Qualified | ||
| 4 | Elongation (%) | TD (CD) | ≥150 | 764 | Qualified |
| MD | ≥200 | 528 | Qualified | ||
| 5 | Tensile Strength | TD (CD) | ≥16 | 23 | Qualified |
| MD | ≥18 | 36 | Qualified | ||
| 6 | Release Force (N/25mm) | 3-8g, 10-15g | 0.06 | Qualified | |
| 7 | Subsequent Adhesion (%) | ≥90 | 91 | Qualified | |
Advantages:
| 1. Easy to construction |
| 2. Low release force, easy peel off when remove the release film |
| 3. High residual adhesiveness rate(≥90%) to prevent the influence of silicon transfer on products |
| 4. Environmental Production technology of solvent and solvent-free products |
| 5. Environmentally Friendly. Can be recycling |
| 6. High temperature resistance than PE, can resistance 130-160 degrees |
Application:
Release Film for Butyl Tapes
Release Film For Self-adhesive Waterproof Membranes:
FAQ:
1).Can you offer free samples?
Yes, we provide free samples, but we usually don't pay for freights.
2).Can you support customization?
Sure, OEM&ODM are available.
3).Are you factory or trading company?
We have two work pants in Taicang Jiangsu and Chenzhou Hunan, we also have a selling office in Shanghai.
4).What's your payment terms?
Usually we prefer T/T, 30% deposit and 70% balance before shipmen. Anyway, T/T, L/C, Western Union, Money Gram, are acceptable.
