Shenzhen Pride Instrument Inc. |
|
Digital welding Gauge
Use to
Measure fillet weld.
Measure weld throat thickness.
Precision design, for measuring of flat welding seams and welding seams in corners.In order to observe the required V-seam-angle at flat welds, the angles of 60°, 70°, 80°and 90° are attached at the gauge.
Abilities:
Holds either the zero setting or measured value at any position for diffrential measurements.
Has a serial output to interface with a computer or printer to process data.
Automatically turns on by moving the main sacle or by pressing ON/OFF key.
Automatically turns off after 4 minutes of inactivity…conserving battery power.
Features:
Measures Butt Weld Reinforcement
Measures Throat
Stainless steel,Hardened and ground
Turn on/off,Switchable mm/inch
Measured value showed on a big LCD-Display
Reading +/- 0,01 mm
Power supply: Battery 1.5 V, LR44 SW
With data output interface
Function:
1. Zero setting at any position
2. Metric/ Inch system conversion at any
position
3. The digital weld gauge is equipped with
an output port
Data can be input into a computer or a
special printer via special connecting cable.
The working way
of the interface
Synchronous serialization
Data: Binary code, 24 bits Each datum
will be transferred twice. The cycle is
300ms(20ms in fact reading mode)
Transmitting time: 0.5ms