|
[China]
Trade Verify
Address: North 5th floor, West technology park, West Wenyi Road, Zhongxin Road, Yuhang city, Zhejiang Province, China
Contact name:Hogo Lv
Hangzhou Altrasonic Technology Co., Ltd |
|
Verified Suppliers
|
|
|
No Sweat Cutting 40 Khz Ultrasonic Cutting Machine With Stainless Steel Cutting Head High Quality
Description:
Ultrasonic cutting machine is an ultrasonic device specially used
for cutting, which is one of the important categories of ultrasonic
applications.
The principle is completely different from traditional cutting. The
ultrasonic cutting machine utilizes the energy of the ultrasonic
wave to melt the local heating of the material to be cut, thereby
achieving the purpose of cutting the material.
The difference between traditional cutting and ultrasonic cutting:
Ultrasonic cutting machine is the use of wave energy for cutting
equipment, the main t feature is not to use the traditional edge.
The traditional cutting utilizes a tool with a sharp edge to press
the cutting material. The pressure is concentrated at the edge of
the blade, the pressure is very large, more than the shear strength
of the cutting material , then the material is cut open. As the
material is cut by a strong pressure, so the cutting tool edge
should be very sharp and the material itself has to bear the
relatively large pressure. Therefore the cutting effect for the
soft, flexible material is not good, especially more difficult for
sticky material.
Ultrasonic cutting advantage and features:
1. Cut the material quickly and precisely
2. Smooth and traceless cutting edge
3. Powerful, effective realiable
4. Low cost, easy operator. An operator only handle the probe and
step the foot switch .So anybody can use it easily.
FREQUENCY | 40Khz |
POWER | 500W 800W |
INPUT | AC110-240V, 50/60Hz |
POWER CONTROLLER | stepping or continuous |
MATERIAL OF CUTTING HEAD | aluminum alloy, stainless steel, titanium alloy, alloy steel. |
MACHINE WIGHT | 4 kg-16KG |
ACCESSORIES | foot switch, additional blade |
COOLING DEVICE | compressed air mouth can be installed. |
CABLE LENGTH | 2M or customized |
FOOT SWITCH | available |
Applications:
1. For thermal plastic gate cutting and flush cutting.
2. For non-woven or woven cutting,textile cutting, fabric cutter, curtain cutting,window blind fabric
3. For rubber, PVC, leather plastic, cardboard, acrylic, polyprolene and so on cutting.
4. For tape and film cutting .
5. For paper cutting,printing industry cutting.
6. For package material cutting
7. For the automotive industry cutting
No Sweat Cutting 40 Khz Ultrasonic Cutting Machine With Stainless Steel Cutting Head High Quality
