Active Member
|
[China]
Address: Room E506, YingChuangDongLi Park, 1# of ShangDi East Road, Haidian District, Beijing, China
Contact name:Lareina Lee
Mitech CO.,LTD. |
|
Mitech Digital Portable Vibration Meter MV800C with high sensitivity and accuracy
Introduction
MITECH portable vibration meter MV800C is made up of piezoelectric transducer and digital display circuit. It is mainly used to measure vibration acceleration, speed and displacement of various rotary machine. This product has the advantages of large measurement, wide variety, intuitively demonstration, small size, light weight etc. It is widely used in measurement on site or at height and can reduce the working strength, improve the working efficiency.
Technical Parameters
| Vibration pickup | Integrated ring acceleration transducer |
| Measurement range(displacement) | 0.001~1.999mm(Peak to peak: valid value*2√2) |
| Measurement range(speed) | 0.1~199.9mm/s (valid value) |
| Measurement range(acceleration) | 0.1~199.9m/s2(peak value: valid value*√2) |
| Measurement accuracy | ±5% measured value |
| Indication error | ±2 |
| Frequency range | 10Hz~10KHz |
| Sampling period | 1s |
| Display mode | 3-digit Semi liquid crystal display |
| Output signal | AC 2v(peak value, full measurement above 10k) |
Working Conditions
Operation temperature: 0~50℃
Memory temperature: -30℃~+70℃
Relative humidity: below 90%RH
Display
Configuration
| Configuration | NO. | Part name | QTY. | Remarks |
| Standard config | 1 | Main unit | 1 | |
| 2 | Short probe | 1 | ||
| 3 | 6F22 battery | 1 | ||
| 4 | User’s manual | 1 | ||
| 5 | Warranty | 1 | ||
| Optional config | 6 | Long probe | 1 | |
| 7 | Earphone | 1 | ||
| 8 | Sheathe | 1 | ||
| 9 | Cable (signal line) | 1 |
