|
[China]
Trade Verify
Address: No. 196 Shitashang Qiufeng Village, Fuchun Subdistrict, Fuyang District, Hangzhou City, Zhejiang Province, China. 311400
Contact name:Tina
Hangzhou Qianrong Automation Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
60Khz Line Type Ultrasonic Atomation Nozzle
Description:
The line spray type focused ultrasonic atomization nozzle is combined with low-pressure air/gas to produce a soft, highly focused small droplet beam. The isolated wave tube transports the liquid to the atomization surface of the nozzle, while the air/gas transported through the nozzle hole at a fixed low pressure shapes the atomized droplets into a very precise target jet beam with a diameter of only 0.020 inches (0.5 millimeters).
Parameters:
| Model | FSW-6005-L |
| Name | 60Khz Line Ultrasonic Nozzle Atomization |
| Frequency | 60Khz |
| Atomized particle size range(μm) | 15-40 |
| Spray width(mm) | 0.5-2 |
| Spray flow(ml/min) | 0.01-1 |
| Spray height(mm) | 10-20 |
| Liquid viscosity (cps) | <15 |
| Particle size (μm) | <8 |
| Diversion pressure (Mpa) | <0.02 |
| Application | Medical balloon, stent, fine wire spraying |
The advantages of ultrasonic fine line spraying:
1. Minimal spraying area, minimal flow rate: spraying width 1-2mm, minimum flow rate 0.005ml/min
2. Uniform coating: Uniformity>95
3. Saving raw materials: The utilization rate of raw materials is over 85%, which is 4 times higher than traditional two fluid spraying
4. Efficient spraying, reducing raw material consumption
5. Fine atomized particles, uniform atomized particles
6. It can be sprayed intermittently or continuously
7. Will not block the nozzle
8. Anti corrosion nozzle
9. High precision controllable spraying
60Khz Line Type Ultrasonic Atomation Nozzle
