Analog Generator 40Khz Ultrasound Cutter With Smooth Cutting Edge

40Khz Ultrasound Cutter with Smooth Cutting Edge Special Fabric Cutting Blade

Description: 

The 40Khz ultrasonic cutter replaces the sharp-edged knives in traditional cutters. The pressure of traditional cutting knives is concentrated at the cutting edge, and the pressure is very large, which exceeds the shear strength of the material to be cut, and the molecular bonds of the material are pulled apart and cut off. Since the material is pulled apart by strong pressure, the cutting edge of the cutting tool should be very sharp, and the material itself must bear a relatively large pressure. The cutting effect is not good for soft and elastic materials, and it is more difficult for sticky materials.
Ultrasonic cutting knives do not need a sharp edge, nor do they need a lot of pressure, and will not cause damage to the fabric. At the same time, due to the ultrasonic vibration of the cutting blade, the frictional resistance is very small, and the material to be cut is not easy to stick to the blade.

Specifications:

Advantage:

1. Cutting the fabric with no scattered side, no hardening, smooth and beautiful

2. Can be hand-held or installed on machines and lines, easy operation

3. Power adjustable, can connect with the client’s control system

4. Safe separation and sealing of the workpiece during operation

5. Beautiful and closed cutting edge

6. Special fabric cutting blade, cutting high quality, easy to replace

7. Completely replace the resistance heat knife cutting process, energy saving and environmental protection

40Khz Ultrasound Cutter with Smooth Cutting Edge Special Fabric Cutting Blade