|
[China]
Trade Verify
Address: No. 196 Shitashang Qiufeng Village, Fuchun Subdistrict, Fuyang District, Hangzhou City, Zhejiang Province, China. 311400
Contact name:Tina
Hangzhou Qianrong Automation Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
1000w High Power 20Khz Ultrasonic Rubber Cutter Assembled for CNC Cutting System
Description:
The rubber ultrasonic cutting machine is a type of equipment that uses ultrasonic energy for cutting processing. The rubber ultrasonic cutting machine is a special application of the ultrasonic cutting machine. It is a kind of equipment that uses ultrasonic energy to cut and process. Its biggest feature is that the cutting does not use the cutting edge. Or, without the traditional edge
The rubber ultrasonic cutting machine melts the localized heat of the material to be cut by the energy of the ultrasonic wave, thereby achieving the purpose of cutting the material. Therefore, the ultrasonic cutting does not require a sharp cutting edge, nor does it require a large pressure, and does not cause chipping or breakage of the material to be cut. At the same time, since the cutting blade is subjected to ultrasonic vibration, the frictional resistance is particularly small, and the material to be cut is not easily adhered to the blade. This is especially effective for viscous and elastic materials, frozen materials such as foods, rubber materials, and inconvenient objects. Ultrasonic cutting also has a great advantage, that is, it has a fusion of the cutting part while cutting, and the cutting part is sealed, which does not cause the textile material to flash. The ultrasonic cutter cutter directly loads the ultrasonic energy onto the cutter, and the cutter becomes a cutter with ultrasonic waves. When cutting materials, the material is mainly softened and melted by ultrasonic energy. The cutting edge of the cutter only functions as slit positioning, ultrasonic energy output, and separation material. This cutting method is suitable for cutting thick, thick, long, etc. materials that are inconvenient to set the cutting board. Such as raw rubber output from the rubber mixer, pipe cutting, frozen meat, candy, chocolate cutting, cake cutting, printed circuit boards, etc.
Specifications:
| Item No | QR-CR20Y |
| Power | 1000W |
| Generator | Digital generator |
| Frequency | 20KHZ |
| Voltage | 220V or 110V |
| Cutter Weight | 2kgs |
| Gross weight | 13Kg |
Comparison between Traditional Cutter and Ultrasonic Cutter:
| Traditional Cutter | Ultrasonic Cutter |
| A sharp-edged tool that presses against the material being cut. | The ultrasonic energy is concentratedly input to the cutting portion of the material to be cut. |
| The pressure is concentrated at the cutting edge, the pressure is very large, exceeding the shear strength of the material being cut, and the molecular bonding of the material is pulled apart and cut. | Under the action of huge ultrasonic energy, this part softens and melts instantly, and the strength is greatly reduced. The purpose of cutting the material can be achieved with a small amount of force |
| The cutting tool has a sharp edge and the material itself is subject to relatively high pressure. | High stability, environmental protection and no pollution |
| It is not good for soft and elastic materials, and it is more difficult for viscous materials. | The biggest feature is that there is no traditional cutting edge. |
Application:
Tire crown; nylon; steel strip plastic layer; nylon cord; inner lining; sidewall; apex; triangle ring, etc.; printed circuit board; natural fiber; synthetic fiber; non-woven fabric; thin synthetic resin; All forms of paper; base film; food (cake, sugar, meat).
1000w High Power 20Khz Ultrasonic Rubber Cutter Assembled for CNC Cutting System
