|
[China]
Trade Verify
Address: No. 196 Shitashang Qiufeng Village, Fuchun Subdistrict, Fuyang District, Hangzhou City, Zhejiang Province, China. 311400
Contact name:Tina
Hangzhou Qianrong Automation Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
60K High-frequency Vacuum Blood Collection Vessel Spraying with Long Nozzle Ultrasonic Atomization Spraying
Description:
The control type (long mouthed) aims to produce reproducible thin lines, down to 0.5mm. In very small volume applications, low pressure air/gas is used to focus spray into very thin lines. The long mouthed design creates the thinnest and clearest lines among all nozzles. Can be applied for in vitro spraying.
The probe type ultrasonic nozzle is an extended type of ultrasonic
atomization nozzle. It adopts ultrasonic atomization nozzle
technology and extends the ultrasonic nozzle into a narrow space
for spraying by extending the front end design of the nozzle. It is
mainly used for probing the inner wall of pipelines for spraying
applications.
Typical applications include vacuum blood collection tube spraying,
syringe silicone oil spraying, etc. FUNSONIC provides a complete
ultrasonic spraying solution for vacuum blood collection and
spraying. The controllable ultrasonic nozzle can perform ultrasonic
spraying with 5-10 parallel heads, and the distance between the two
nozzles is only 25mm. It can be directly used in existing vacuum
blood collection production lines. Combined with a dedicated
precision metering pump, the anticoagulant is evenly sprayed into
the inner wall of the vacuum blood collection vessel, with a
production speed of up to 12000 tubes per hour.
Parameters:
| Model | FSW-6004-L |
| Name | 60Khz Long Nozzle Ultrasonic Atomization Spraying |
| Frequency | 60Khz |
| Atomized particle size range(μm) | 15-20 |
| Spray width(mm) | 1-3 |
| Spray flow(ml/min) | 0.5-10 |
| Spray height(mm) | 10-20 |
| Liquid viscosity (cps) | <15 |
| Particle size (μm) | <8 |
| Diversion pressure (Mpa) | <0.1 |
| Application | Vacuum blood collection production line |
Advantage:
1. High stability: Made of high-performance titanium alloy and
stainless steel, it has strong adaptability, corrosion resistance,
no pressure, no noise, no nozzle wear and blockage, and high
uniformity of atomized particles.
2. Material saving and environmental protection: the impact of
spray is very small, which will not cause liquid splashing, thus
reducing the waste of raw materials and air pollution caused by
back spraying. The material utilization rate of ultrasonic spraying
is more than 4 times that of traditional two fluid spraying.
3. High controllability: it can accurately control the atomization
flow, low flow continuous spray, and spray shape is easy to control
and shape (increase the spray manipulator), which is applicable to
the industrial field. By combining, the atomization amount can meet
any requirement.
4. Easy maintenance: The liquid is transmitted to the spray head
through its own gravity or low-pressure pump and realizes
continuous or intermittent atomization. There is no blockage, no
wear, no noise, no pressure, and no moving parts. When atomizing,
there is no need for cooling water. The energy consumption is
small, the equipment is simple, and the failure rate is low. The
ultrasonic spray head has the function of cleaning and daily
maintenance free.
60K High-frequency Vacuum Blood Collection Vessel Spraying with Long Nozzle Ultrasonic Atomization Spraying
