3000w Ultrasonic Metal Welding Machine For Wire Welding In Auto Industrial Application

3000w Ultrasonic Metal Welding Machine for Wire Welding in Auto Industrial Application

Description: 

With the continuous improvement of people's requirements for comfort, economy and safety, the types of electronic products on the car are also constantly added, and the failure rate of the car wiring harness is becoming more and more disordered. This requires improving the reliability and durability of the harness.

Wire harness lap welding for passenger car wire harness welding and spot welding plan for car wire harness terminal (copper wire and copper wire soldering, copper touch terminal and copper wire soldering, copper connector and cable wire soldering). The wire harness welding of the car is changed to the latest ultrasonic wire harness welding. This is the welding process used in the wire harness of high-end cars in Europe and America. The wire harness of the car is welded by ultrasonic technology: the wire harness has good quality, the wire harness does not change the metal structure, the wire harness looks beautiful, and the wire harness is strong and satisfactory. After welding, no processing is required, and flux solder is not required. The principle of ultrasonic welding is that the mold can declare the sensation frequency of 20,000-70,000 times per second, which can make the wires of the two ends evenly link, and when the wire is quickly sensational, the heat will be generated, making the link more and more solid.
 
 
Parameters: 

Examples of metal welding usage:

The connection of the stranded wire and the single stranded wire, the ultrasonic copper stranded wire bundle crimping machine is used in the place where the safety and efficiency of the production filter are high, such as the wiring of the cable wire of the car industry in the world. Depending on the car's equipment, there are hundreds of solder joints in the cable wiring of each car. Almost all of its famous car manufacturers have chosen this process of transformation and have been successfully used for many years. This process is not only used for the final compaction of a single stranded wire, but also for joining a plurality of stranded wires into nodes. At this point, the connector can act as a filter node or a final node. The metal connection between the joining components has good electrical conductivity. It is also possible to carry out the connection between the stranded wire and the terminal very economically. The heat generated in the weld zone is low and does not thermally damage the insulation of the stranded wire. Therefore, the cable of the stranded wire can be fixed immediately after welding. In addition to conventional ultrasonic strand welding, it is also very effective to connect the wires to the tabs or wires and wires in this way. A newer concept is the successful use of ultrasonic welding in the cable wiring of car electrical systems.

 
3000w Ultrasonic Metal Welding Machine for Wire Welding in Auto Industrial Application