Active Member
|
[China]
Address: Dongbao Industrial Park, Bao'an District, Shenzhen 518106.
Contact name:Jane
AG SONIC TECHNOLOGY LIMITED |
|
|
Heate Industrial Pump Ultrasonic Cleaner Machiner Automatic Ultrasonic Cleaner 30l
Heater Automatic Ultrasonic Cleaner 30l Industrial Pump Ultrasonic Cleaner Machine
Ultrasonic Cleaner Auto Industry
We are the manufacturers of custom built Ultrasonic Cleaning
machines for degreasing and cleaning of auto parts for OEMs , work
shops , job works and auto-restoration industry. We expertise in
providing customized designed solution for auto parts cleaning.
Ultrasonic cleaning is a water based cleaning solution where
ultrasonic transducers are used to provide cavitation agigation
insude the tank which has waer and suitable chemical to clean
oil,dirt,debree,grease and other contaminants from various types of
auto components.
We expertise in all types of ancilary parts washing like brakepads,
steering coloumns, crank shats, pistons, valves, gaskets, clutch
pads, mirrors and many more.
An ultrasonic injector cleaner and injector flow bench.
The preferred method of cleaning injectors. Cycles the fuel injectors while the fuel injector tips are immersed in an ultrasonic bath, which uses an environmentally friendly cleaning fluid to clean the fuel injectors. The flow bench portion also allows a user to perform a flow test before and after cleaning, and it allows the user to observe the fuel injector spray pattern. This method requires that the fuel injectors be removed from the engine
How do I get the best ultrasonic cleaning?
There are many considerations important to ultrasonic cleaning.
Optimising these variables will produce the best cleaning. The most
important decisions to be made are choosing the proper cleaning
solution, cleaning at the right temperature for the correct amount
of time, and choosing the right size and type of ultrasonic
cleaner.
Is a special solution required for industrial Pump Ultrasonic
Cleaner Machine cleaning ?
Soils adhere to the parts... if they didn't, the soil would just
fall off the parts! The purpose of the solution is to break the
bonds between parts and their soils. Water alone has no cleaning
properties. The primary purpose of the ultrasonic activity
(cavitation) is to assist the solution in doing its job. An
ultrasonic cleaning solution contains various ingredients designed
to optimise the ultrasonic cleaning process. For example, increased
cavitation levels result from reduced fluid surface tension. An
ultrasonic solution will contain a good wetting agent or
surfactant.
applications cleaning industrial Pump Ultrasonic Cleaner Machine cleaning following and more:
WHY CLEANING IS IMPORTANT
Dirty tools can cause tool binding, which can result in damage to the tooling and the tablet press. Keeping tools clean will decrease the chance of premature tool wear, allow lubrication to be more effective, and the machine to
run more efficiently – which will increase product yield.
HOW industrial Pump Ultrasonic Cleaner Machine cleaning WORKS
Ultrasonic cleaners use high frequency pressure waves to cause cavitation to agitate a liquid (usually cleaning solution and/or water, which in turn creates tiny bubbles that loosen and remove debris.
This action is highly effective for removing all traces of product
| Model | TB-500 |
| Ultrasonic Frequency | 40,000 Hz |
| Material | SUS304 |
| Tank Capacity | 30L |
| Ultrasonic Power | 500 W |
| Heating power | 600W strong power, quick heating |
| Timer | 1-30min adjustable |
| Heater | 0-80C adjustable |
| Unit Size | 530 x 325 x 325 mm ( L x W x H ) |
| Tank Size | 500 x 300 x 200 mm ( L x W x H ) |
| Package Size | 635 x 405 x 390 mm ( L x W x H ) |
| N.W. | 14 kg |
| G.W. | 15.6 kg |
| Power Supply | AC 100 ~ 120V, 50 / 60Hz AC 220 ~ 240V, 50 / 60 Hz |
BENEFITS
MORE EFFECTIVE industrial Pump Ultrasonic Cleaner Machine cleaning CLEANING
Ultrasonics clean more effectively and thoroughly than manual scrubbing, which can be ineffective on heavily soiled tooling and can cause damage to delicate surfaces. Using ultrasonic waves to clean will remove material even tightly adhered to surfaces.
REDUCED industrial Pump Ultrasonic Cleaner Machine cleaning COST
Not only does ultrasonic cleaning save labor cost, it also completes the cleaning cycle in less time. A typical cleaning cycle for moderately soiled tools can last 10 minutes or less and requires little supervision, which frees up staff to spend time completing other tasks.
Features of the machine:
•Low maintainence machine
•Heavy duty cleaning systems
•Chemical friendly- SS Rust proof body
•Industrial guage farication, build to last
•One year warrenty on any manufacturing defect
•Completely customized to suit the cleaning requirement
•Less human interfearance and less scope of error
•Accurate and uniform cleaning everytime
When ultrasonic energy is introduced into a cleaning solution, it
creates a pattern of alternating high and low pressure. The extreme
low-pressure phase creates microscopic vacuum bubbles. During the
subsequent high-pressure phases, the bubbles implode violently.
This process is known as cavitation.
Cavitation provides an intense scrubbing action that leads to quick
and consistent cleaning. It takes the standard practice of manual
immersion and agitation to a much higher level. The bubbles are
small enough to penetrate even microscopic crevices, allowing for
cleaning in the most out-of-reach corners.
