Home Companies Lanry Instruments (Shanghai) Co., Ltd.

DN20 Sewer Fiberglass Ultrasonic Open Channel Flow Meter

Active Member

Contact Us

[China]

Address: 8 Floor, Block C, Bldg 5, No.2800 Jiuxin Rd., Songjiang District, Shanghai,201612, China

Contact name:Tracy Xu

Lanry Instruments (Shanghai) Co., Ltd.

DN20 Sewer Fiberglass Ultrasonic Open Channel Flow Meter

Country/Region	china
City & Province	shanghai shanghai
Categories	Water Treatment

Product Details

China Supplier Area Velocity ultrasonic Flow Meter

DOF6000 series China Supplier Area Velocity Flow Meter consists of
flow calculator, and the integrated DOF6526 transducer to measure
velocity and level at the same time.

The flow calculator can display the velocity, level, flow rate and
flow totalizer. It also can be available with 4-20mA, RS232, RS485
(Modbus) /GPRS and SD card logger outputs. It can record data of
flow rate and total flow with a SD card up to 8GB.

The flow calculator can calculate the cross-sectional area of
partially filled pipe, open channel stream or river, for stream or
river,it can input up to 20 coordinate points describing the
river's shape of cross section.It is suitable for variou
applications.
The DOF6526 Velocity and Level Transducer is a unique combination
of water velocity, depth and temperature instruments integrated
with a solid state logger. It is a new generation of intelligent
flow measurement systems.
By using digital signal processing techniques, transducer is able
to perform in a wide range of environments. It is used to record
flows in pipes, channels and small streams and operates in a wide
range of water qualities from fresh streams to primary sewage
channels.
DOF6526 Transducer is mounted on (or near to) the bottom of the
stream/pipe/culvert an measures the velocity and depth of the water
flowing above it.
DOF6000 series China Supplier Ultrasonic Level Velocity Flow Meter
have been tested in small streams and pipes, and the calibration
has been verified in a tow tank. Indications are that different
channels have different characteristics and that acoustics can see
velocity distributions that, if they are correct, may challenge
some conventional ideas.

Features:

1. Hot-tapped installation, no pipe line flow interrupted
2. Wide liquid temperature range: -35℃~200℃.
3. Data logger function for insertion ultrasonic flow meter
4. Thermal energy measurement capability can be optional.
5. For commonly used pipe materials and diameters from 20mm to over 6.0m.

6. Wide bi-directional flow range of 0.01 m/s to 12 m/s..

7. Display: 4 line×16 English letters LCD graphic display, backlit

Application

General
● Service and maintenance

● Replacement of defective devices

● Support of commissioning process and installation

● Performance and efficiency measurement
- Evaluation and assessments
- Capacity measurement of pumps
- Monitoring of regulating valves

● Energy efficiency audits

Water and waste water industry - hot water, cooling water, potable water, sea water etc.)
Petrochemical industry
Chemical industry -chlorine, alcohol, acids, .thermal oils.etc
Refrigeration and air conditioning systems
Food , beverage and pharmaceutical industry
Power supply- nuclear power plants, thermal & hydropower plants), heat energy boiler feed water.etc
Metallurgy and mining applications
Mechanical engineering and plant engineering-pipeline leak detection, inspection, tracking and collection.

Specifications:Transmitter

Measurement principle	Ultrasonic transit-time difference correlation principle
Flow velocity range	0.01 to 12 m/s, bi-directional
Resolution	0.25mm/s
Repeatability	0.2% of reading
Accuracy	±1.0% of reading at rates >0.3 m/s);±0.003 m/s of reading at rates<0.3 m/s
Response time	0.5s
Sensitivity	0.003m/s
Damping of displayed value	0-99s(selectable by user)
Liquid Types Supported	both clean and somewhat dirty liquids with turbidity <10000 ppm
Power Supply	AC: 85-265V DC: 24V/500mA
Enclosure type	Wall-mounted
Degree of protection	IP66 according to EN60529
Operating temperature	-20℃ to +60℃
Housing material	Fiberglass
Display	4 line×16 English letters LCD graphic display, backlit
Units	User Configured (English and Metric)
Rate	Rate and Velocity Display
Totalized	gallons, ft³, barrels, lbs, liters, m³,kg
Thermal energy	unit GJ,KWh can be optional
Size	244196144mm
Weight	2.4kg

Specifications:Transducer

Degree of protection	IP67 or IP68 according to EN60529
Suited Liquid Temperature	Std. Temp.: -35℃~85℃
Suited Liquid Temperature	High Temp.: -35℃~150℃
Pipe diameter range	DN65-6000
Transducer Size	Type S Φ58*199mm
Material of transducer	Stainless Steel
Cable Length	Std: 10m
Temperature Sensor	Pt1000, 0 to 200℃, Clamp-on and Insertion type Accuracy: ±0.1%

Datasheet Download TF1100-EI transit-time insertion ultrasonic flowm...

Manual Download TF-1100-EC&EI heat meter Manual.pdf

Packing & Delivery

Inserted Type Ultrasonic Flow Meter With 4-20mA Output for clean liquid application

With years of export experience along with excellent quality, advanced services and competitive prices, Lanry has won numerous customers' trust and support. With years of export experience along with excellent quality, advanced services and competitive prices, Lanry has won numerous customers' trust and support.